Renovation of an educational facility in Auburn, Alabama. Completed plans call for the renovation of a educational facility.

Installation of Floor Covering Pick Elementary School A cashier's check or bid bond payable to "AUBURN CITY SCHOOLS" in an amount not less than five (5) percent of the amount of the bid, but in no event more than $10,000, must accompany the bidder's proposal. Performance and Payment Bonds and evidence of insurance required in the bid documents will be required at the signing of the Contract. The Owner reserves the right to reject any or all proposals and to waive technical errors if, in the Owner's judgement, the best interests of the Owner will thereby be promoted. Replace all existing carpet in the school Shaw: Carpet tile 24x24. Collection: No Rules. Style name: Diffuse tile. Style # 59575. Color name: Flyway. Color #75400 PES Replace all existing rubber base in school Roppe 700 Series 4 1/2” w/ Toe or equivalent, rolled base (not 4 ft sections) and wrapped rounded corners. Color: 139 Deep Navy Any questions and/or correspondence regarding the specifications should be addressed to Dr. Dennis Veronese, Assistant Superintendent, at 887-2100. Bid documents must be addressed to: Dr. Dennis Veronese, Assistant Superintendent Auburn City Schools P.O. Box 3270 Auburn, AL 36831-3270 Telephone: (334) 887-2100 Installation of carpet should be per manufacturers' specifications including: 1. Base specifications- rolled base throughout the school with wrapped rounded corners. 2. Transition strips should be equivalent to the existing transition strips to be removed. All base carpet to tile and rubber flooring transition strips should be replaced with new transition strips equivalent to existing product and used on all seams or transitions where carpet joins VCT, rubberized flooring or equivalent. All transition strips should match color of specified base material. 3. Comply with manufacturer's instructions and recommendations for seam locations and direction of carpet; maintain uniformity of direction and lay of pile.4. Provide cut-outs where required and bind at edges properly where not concealed. 5. Fit sections of product into each space prior to application of adhesive. 6. Apply adhesive uniformly to substrate in accordance with manufacturer's instructions. Remove adhesive promptly from face of product. 7. Replace all rubber base and transition strips in designated areas. 8. Contractor responsible for costs associated with removal and installation of carpet and rubber base. Including wall repair if necessary.