Renovation of a municipal facility in New Ulm, Minnesota. Completed plans call for the renovation of a municipal facility.

The project will consist of removal of the existing adhered EPDM roof system and installation of a new 90 Mil EPDM roof system with tapered insulation and exterior metal wall panels. Est. Completion Date: Aug. 15, 2025. Question Deadline 02/20/2025 at 2:00 PM CT This Section is for the convenience of the Contractor only and should not be construed as a complete accounting of all work to be performed. The extent of the scope of work is indicated on the drawings and by the requirements of each Section. A copy of this Project Manual, Specifications and Detail Drawings (including all addenda and change orders) is required to be available on the project site at all times. PART 1 - GENERAL 1.01 Discovery and Verification: A. It is the responsibility of the Contractor to visit the project site to verify dimensions and construction of all existing details, equipment, and job site conditions pertaining to this work prior to bidding. B. The details shown and descriptions of existing assemblies were obtained via isolated and random reviews by Roof Spec, Inc. and/or from the original drawings. C. Materials and conditions shown by the details should not be construed as representative of each detail item on the entire roof area.Demolition and Roof Preparation: A. Prior to removal of existing roof system, provide all necessary protection for Owner's equipment and personnel. B. Remove debris and loose gravel (if present) from roof area and properly dispose of all materials off-site. C. Tear off existing roof membrane, base flashings, insulation material and loose vapor retarder (if present) down to the roof deck and properly dispose of off-site. D. Ensure that all drains are in proper working order and that drain lines are clear to the first elbow