Site work for a civil project in Euless, Texas. Completed plans call for site work for a road / highway.

Traffic Signal Improvements A complete "turn-key" install of the following: 1A. Full Upgrade - Rewire Intersection, Replace Cabinet, Remove and Replace Camera (2C, 5C, 7C, and 20C / Cabinet Upgrade Heinke / Iteris Next) 1. Raider / Highway 10 2. Wilshire / Highway 10 3. Ector / Simmons / Highway 10 4. Vine / Highway 10 1C. Rewire Intersection and Replace Cabinet (2C / 5C / 7C / 20C / Cat 5) 1. Westpark / Highway 10 2. 157 / Highway 10 3. Main / Highway 10 Contractor Provides: A. Traffic Control Plan that has to be submitted and approved by city B. Traffic Control C. Provide Wiring : 2C / 5C / 7C / 20C D. Remove existing old wire E. Labor F. Install 20C from cabinet into hand holds of each Pole G. Install 7C from hand holes to signal heads H. Install 5C from cabinet to ped heads I. Install 2C from ped button to hand hole terminal block J. Leave existing Opticom wire K. Wire in new Heinke cabinets with riser included L. Install new Iteris Next cameras / mounting brackets / Camera Pole / Install Cat 5 cable to cameras M. Install Iteris CCU and monitor into cabinet N. Remove BBU cabinets from existing cabinets and install on new Heinke cabinet and wire in BBU. Install new Alpha units 1100's. O. Solder in new 16 channel MMU cards based on previous 12 channel cards P. Replace terminal blocks as needed in hand holes City Provides: A. Heinke Cabinet ( MMU / Power Supply / Controller ) B. Cabinet Base C. Iteris Next Cameras ( 1000' of cat 5 per intersection ) D. Ethernet Cable Questions concerning the plans, specifications, or other bid documents or any part thereof must be submitted through online in the Q & A portal