Site work for a civil project in Napoleonville, Louisiana. Completed plans call for site work for a bridge / tunnel; and water / sewer project.

Steel Reinforced Polyethlene Pipe - A steel reinforced polyethylene pipe for use such as storm sewers, sanitary sewers, industrial waste applications, drainage pipes, underground detention, infiltration, cistern or rainwater harvesting systems in 30" (750 mm) through 120" (3000 mm) nominal diameters to be delivered to parish Public Works Department at 141 Hwy 1008, Napoleonville, LA or to designated area of the parish. IMPORTANT-PLEASE NOTE o Specifications will be strictly enforced. (i.e. No bid will be accepted after 2:00 P.M. The Public Works Dept. clock will be official time). Make arrangements for prompt delivery of bid. o Also, bids must be marked for the item and in an individual envelope. Bid submitted otherwise will be void. o All entries on Bid Forms must be original. No white-out or corrections will be accepted. Bid submitted otherwise will be void. o Anyone attending bid opening is encouraged to be prompt and prepared to record information during opening procedures. o All vendors are responsible for their own invoicing directly with their suppliers. o No copies of bid results will be available until accepted by the Assumption Parish Police Jury at its next regular scheduled meeting. DESCRIPTION . A reinforced polyethylene pipe with a smooth waterway wall and exterior profile that is reinforced with high strength galvanized steel ribs. The continuous reinforcing ribs are completely encased within the polyethylene profile. A steel reinforced polyethylene pipe is manufactured using a helical winding process that results in a continuously fusion welded lap seam. The pipe profile is manufactured using a high-quality stress-rated thermoplastic meeting the requirements of ASTM F2562 "Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage" or AASHTO Designation M-335 (30"-60") and MP-40 (66"-120"). For the purpose of hydraulic design, the recommended Manning's "n" value shall be 0.012 for pipe diameters included within this specification.