Site work and outdoor lighting for a transportation facility in Fort Dodge, Iowa. Completed plans call for site work for a transportation facility; and for outdoor lighting for a transportation facility.

FortDodge Regional Airport: Reconstruct Taxiway B Lighting System Site Directions: FortDodge Regional Airport 1639 Nelson Ave #2 FortDodge, IA 50501 1 STORMWATER POLLUTION PREVENTION PLAN (SWPPP) PREPARATION AND MANAGEMENT 2 TEMPORARY SEEDING AND MULCHING 3 MOBILIZATION 4 TRAFFIC CONTROL 5 PAVEMENT MARKINGS (WATERBORNE) WITH BEADS 6 SEEDING AND FERTILIZING 7 MULCHING 8 NO. 8 AWG, 5 KV, L-824, TYPE C CABLE, INSTALLED IN TRENCH, DUCT BANK OR CONDUIT 9 NO. 6 AWG, SOLID, BARE COPPER COUNTERPOISE WIRE, INSTALLED IN TRENCH, OR ABOVE THE DUCT BANK/CONDUIT, INCLUDING CONNECTIONS/TERMINATIONS 11 REMOVE CABLE IN EXISTING DUCT 11 VAULT BUILDING MODIFICATIONS 12 REMOVE CONSTANT CURRENT REGULATOR 13 CONSTANT CURRENT REGULATOR, L-829, 7.5 KW, FERRORESONANT, CLASS 1, 3-STEP DRY TYPE, STYLE 1 14 (1) 2" SCHEDULE 40 PVC CONDUIT, IN TRENCH 15 (1) 2" SCHEDULE 80 PVC CONDUIT, DIRECTIONAL BORE 16 ELECTRICAL JUNCTION BOX, L-867 BASE CAN, WITH GASKETED COVER, 16" DIA. 17 REMOVE MEDIUM INTENSITY TAXIWAY EDGE LIGHT AND L-867 BASE CAN, BASE MOUNTED 18 REMOVE MEDIUM INTENSITY TAXIWAY EDGE LIGHT, STAKE MOUNTED 19 REMOVE MEDIUM INTENSITY TAXIWAY EDGE LIGHT, ON EXISTING L-867 BASE CAN TO REMAIN 20 REMOVE GUIDANCE SIGN AND CONCRETE BASE 21 MEDIUM INTENSITY L-861T(L) TAXIWAY EDGE LIGHT, LED, BASE-MOUNTED 22 MEDIUM INTENSITY L-861T(L) TAXIWAY EDGE LIGHT, LED, ON EXISTING L-867 BASE CAN WITH NEW TRANSFORMER 23 INSTALL CONCRETE BASE AND OWNER-FURNISHED L-868(L) LIGHTED AIRPORT GUIDANCE SIGN, LED TYPE, SIZE 1, 1 MODULE, PER PLAN 24 INSTALL CONCRETE BASE AND OWNER-FURNISHED L-868(L) LIGHTED AIRPORT GUIDANCE SIGN, LED TYPE, SIZE 1, 2 MODULE, PER PLAN 25 INSTALL CONCRETE BASE AND OWNER-FURNISHED L-868(L) LIGHTED AIRPORT GUIDANCE SIGN, LED TYPE, SIZE 1, 3 MODULE, PER PLAN 26 SPARE L-861T(L) MEDIUM INTENSITY TAXIWAY EDGE LIGHT, LED, FIXTURE ASSEMBLY WITH STEEL COVER AND ISOLATION TRANSFORMER Each bid shall be accompanied by a Bid Bond in an amount equal to five (5%) of the total amount of the bid. Bid Bonds must be on the form provided with the Contract Documents. The Bid Bond may be forfeited and the proceeds retained as liquidated damages if the bidder fails to execute a contract or file acceptable performance bonds or provide an acceptable certificate of insurance within fifteen (15) calendar days after the acceptance of his proposal by resolution of the City Council. No bidder may withdraw a proposal before September 1, 2025 Phase 1 Improvements Outside of Runway 6-24 and Runway 12-30 Safety Areas 25 Working Days $1,500 / Day Phase 2* Improvements Along Edge of Air Carrier and GA Apron 10 Working Days $1,500 / Day Phase 3 Improvements Inside Runway 6-24 Safety Area 15 Working Days $1,500 / Day Phase 4 Improvements Inside Runway 12-30 Safety Area 15 Working Days $1,500 / Day Total Contracted Construction Time: 55 Working Days Project Closeout Address All Punch List Items from Final Inspection, unless time extensions are authorized in writing by both the Owner and the Engineer. 14 Calendar Days $250 / Day This project is subject to the requirements of 49 CFR Part 26 Disadvantaged Business Enterprise Participation. The owner has established a contract goal of 1.78 percent participation for small business concerns owned and controlled by qualified disadvantaged business enterprises (DBE). The bidder shall make and document good faith efforts, as defined in Appendix A of 49 CFR Part 26, to meet the established goal. The right is reserved, as the FortDodge Regional Airport Commission may require, to reject any and all bids and to waive any informality in the bids received. Goals for minority participation for each trade: 0.4 Goals for female participation in each trade: 6.9