Renovation of a library in Augusta, Georgia. Completed plans call for the renovation of a library.

HQ Library - Roof Replacement for Augusta, GA - Central Services Department - Facilities Maintenance. A 10% Bid bond is required to be submitted along with the bidders' qualifications. A 100% performance bond and a 100% payment bond will be required for award. Invitation for bids and specifications. An invitation for bids shall be issued by the Procurement Office and shall include specifications prepared in accordance with Article 4 (Product Specifications), and all contractual terms and conditions, applicable to the procurement. All specific requirements contained in the invitation to bid including, but not limited to, the number of copies needed, the timing of the submission, the required financial data, and any other requirements designated by the Procurement Department are considered material conditions of the bid which are not waiveable or modifiable by the Procurement Director. Question Deadline 04/16/2025 at 5:00 PM ET All questions must be submitted in writing by fax to 706 821-2811 or by email to procbidandcontract@augustaga.gov to the office of the Procurement Department. Bid date notes: All requests to waive or modify any such material condition shall be submitted through the Procurement Director to the appropriate committee of the Augusta, Georgia Commission for approval by the Augusta, Georgia Commission. Please mark BID number on the outside of the envelope. No bid will be accepted by fax or email, all must be received by mail or hand delivered. roofing Specification 1. General Requirements Roofing system materials requested is a 60-mil TPO Membrane with a R-25 polyisocyanurate (Polysio) insulation. Submittals on roofing system, components, materials, and shop drawings. Refer to the following attachment: o A5.1 R - Roof Plan (Exhibit II) o A5.3 - Roof Details (Exhibit III) Optional Site-Visit will be held on Tuesday, April 15, 2025, at the site location. Please contact Maria RiveraRivera at (706) 821-1629 for additional information. 1.1 Scope of Work o Remove and dispose of the existing roofing system down to the structural deck. o Inspect and repair the deck as necessary. o Install new R-25 polyisocyanurate (Polyiso) insulation. o Install new 60-mil Thermoplastic Polyolefin (TPO) single-ply membrane roofing system. o Provide all necessary flashing, edge metal, and accessories for a complete, watertight installation. 2. Materials 2.1 Insulation o Type: Polyisocyanurate (Polyiso) Insulation o Thickness: R-25 (minimum thickness per manufacturer to achieve R-25) o Attachment: Mechanically fastened per manufacturer's requirements 2.2 TPO Membrane o Type: 60-mil reinforced thermoplastic polyolefin (TPO) membrane o Color: White o Attachment: Mechanically fastened as per manufacturer recommendations o Seams: Heat-welded per manufacturer specifications 2.3 Accessories o TPO-compatible flashing and termination bars o Pre-manufactured TPO pipe boots o Adhesives, primers, and sealants as required