Site work for a power facility in Fresno, California. Completed plans call for site work for a power facility.

Reference Number 0000381118 Kings River Conservation District (KRCD) is requesting for bids for the purchase and installation of Condition Monitoring Equipment for all three generating units at Jeff L.Taylor Hydroelectric Power Plant. A full technical description is included with the notice. Question Deadline 04/21/2025 at 3:00 PM PT Questions are submitted online No The following shall be provided as the minimum base scope for each generating unit2.1. One (1) Magnetic Flux probe 2.2. Four (4) Air Gap sensors on the generator stator top 2.3. Four (4) Air Gap sensors on the generator stator bottom (if deemed necessary) 2.4. Two (2) Generator Guide Bearing Radial Shaft probes for Upper Guide Bearing 2.5. Two (2) Generator Guide Bearing Radial Shaft probes for Lower Guide Bearing 2.6. Two (2) Turbine Guide Bearing Radial Shaft probes for Turbine Guide Bearing 2.7. One (1) Stator Core Absolute Vibration Accelerometer 2.8. One (1) Stator Frame Absolute Vibration Accelerometer 2.9. One (1) Turbine Head Cover Absolute Vibration Accelerometer 2.10. Signal Conditioners required for all the above signals, mounted in a NEMA-4X rated enclosure 2.11. One (1) Sync Probe 2.12. Processing Unit and processing modules for all the above signals- each generating unit shall have its dedicated cabinet mounted in one (1) NEMA-12 enclosure with proper cutouts, swing doors, heating, cooling and air circulation units as required, communication modules and other appurtenances as required. 2.13. One (1) Desktop Computer to serve as the Serve and Data Acquisition Unit 2.14. Appropriate software including licenses for continuous unit condition monitoring and data acquisition 2.15. All required cables and cable hardware including communication cable (EtherNet, Fibre, etc.) 2.16. Site Commissioning and supervision support 2.17. Training (collective- one time)- at the commissioning of first unit. 2.18. Optional Items: Any additional measurement techniques that may benefit the owner and that can be tied to the same condition monitoring system. Provide itemized cost and detailed description of the optional materials.