Site work and paving for a road / highway in Meshoppen, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Purpose of the Project is to Improve Deficiencies and Provide a Smoother Riding Surface, Therefore, Decrease the Cost of Ongoing Roadway Maintenance. The Improvements to the Roadway Are to Eliminate Current Potholes, Depressions, Rutting, and Other Pavement Failures. Resurfacing on State Route 6 State Between State Route 6 Over South Branch Tunkhannock Creek and State Route 6 Fork in Tunkhannock Township and Clinton Township, Wyoming County. The Project is Located in Wyoming County in Various Municipalities in the Commonwealth of Pennsylvania. The Resurfacing Includes Asphalt Wearing Courses, Scratch Courses, Milling, Line Painting, Mechanized Edge Repair, Shoulder Backup, Pavement Markings, and Guide Rail Improvements. All Work Will Be Completed Within the Existing Roadway. The Project is Resurfacing of Approximately 3.16 Miles of Existing Roadway on the Below State Route. All Maintenance and Protection of Traffic (Mpt) Will Be Completed in Accordance With the Special Provisions of the Contract and Will Consist of Short-term Patterns. Sr 0006 Segment 0490 Offset 0000 to Segment 0540 Offset 3475. Project Cost Range: $2,500,000.00 - $4,999,999.99 Federal Project Status: Non - Federal (100% State) Structure Work: 0.00% Pre-Bid Meeting: None Anticipated NTP: 06/23/2025 Wage Rates: Yes Required Completion: 09/24/2025 Prequalification Requirement: Yes State Type of Work: Resurfacing/overlays Responses to questions on this page are for informational and clarification purposes. Official changes to the proposal will be made via an Addendum. The deadline for submitting questions is 72 hours before the let date and time. For Emergency projects, the deadline is reduced to 19 hours before the let date and time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. PADOT: SR 6 Resurfacing - Wyoming This is an ECMS project. All Addenda will be electronically posted.The location of the public bid opening is the Commonwealth Keystone Building, 7th Floor, Contract Awards Room, 400 North Street, Harrisburg. Allow sufficient time before the bid opening to obtain a visitor pass on the 5th Floor and to be escorted to the 7th Floor Contract Awards Room. 1. Cleaning, scrubbing, washing and polishing floors, furniture and windows (including through the use of bonding or flying cranes); For marble, granite, and terrazzo, cleaning, scrubbing, washing, and polishing after final acceptance. 2. Demolition of interiors and removal of all debris; 3. Grading stone and dirt by hand; 4. Form pinning 5. Pouring handling, and placing of all concrete and related materials and all cure applications; 6. Sheathing, lagging, and mining; 7. Cleaning up debris; 8. Stripping, dismantling, oiling and moving of concrete forms; 9. Loading, unloading and carrying of reinforced steel; 10. Handling and distributing lumber and all other building materials, including final strip, and including materials used or installed by mechanical trades (e.g., electrician, plumber, sheet metal worker, insulator); 11. Unloading, carrying, distributing and laying of pre-cast concrete slabs and planks; 12. Wrecking, moving and demolishing underpinning and shoring of all structures; 13. Using flags and other signaling devices; 14. Performing landscaping and nursery work; 15. Serving as a Toolroom Person, hanging tools, delivering tools; 16. Cleaning precipitators; 17. Watching for fires; 18. Operating conveyors; 19. Using vacuum cleaners of all types (ride or walk-along); 20. Digging and filling holes and trenches using hand tools; 21. Driving stakes;