Renovation of an educational facility in Austin, Texas. Completed plans call for the renovation of a educational facility.

Installing a new Process Steam Boiler System within the existing high bay in the southern portion of EME. The process steam will serve the Pilot Plant directly south of EME and will completely replace the existing process steam boiler. Project Location: 10500 Exploration Way, Austin, TX, 78758 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The value range for this project is $1,600,000.00 to $2,100,000.00. The project schedule is to complete the project prior to December 5, 2025. Question Deadline 04/24/2025 at 12:00 PM CT All questions and inquiries regarding this RFP must be submitted via UT Drop Box to Trina A. Bickford, Assistant Director, Contracts Campus Operations The University of Texas at Austin 1301 E. Dean Keeton, Rm. 2.102* Austin, TX 78712 Telephone: 512.471.3042* Email: Trina.Bickford@austin.utexas.edu The Work is defined by the Contract Documents and generally consists of the following: 1. General: selective demolition as required to complete the new work.2. Architectural: installation of new welded wire mech partition system including swing doors and sliding gates; New egress door hardware installed in the mesh partition system; miscellaneous work as required by mechanical, plumbing, and electrical system Work. 3. Structural: Installation of new structural steel support for overhead process steam piping and miscellaneous related equipment; Modifications to existing slab for underfloor plumbing. 4. Mechanical (HVAC): None. 5. Mechanical (Plumbing): Installation of new underfloor drain lines. 6. Mechanical (Process Steam): Installation of new process steam boiler system and associated support equipment; New process steam piping from the steam boiler systems to the demarcation point to serve Owner's research distillation plant. 7. Electrical: Installation of a new electrical switchboard; New branch circuit conduit and wiring; New utility lighting fixtures; New distribution conduit for Owner's low voltage systems. 8. Fire Protection: Repositioning of existing sprinkler heads (if needed). 9. Fire Alarm: Addition of fire alarm notification appliances (if needed).