Demolition, site work, renovation and addition to an educational facility in Long Beach, California. Completed plans call for the addition of a 61,000-square-foot educational facility; for the demolition of a educational facility; for the renovation of a 200,000-square-foot educational facility; and educational facility.

The overall objective of the project is to design and renovate the existing University Student Union ("USU") building, approximately 180,000 GSF. This includes approximately 160,000 GSF of interior area and 20,000 GSF of outdoor covered walkways and seating areas. The project scope also includes the demolition of the existing University Dining Plaza (UDP) building, and the design and new construction of an approximately 61,000 GSF building addition. Target budget for this scope of work is $20,000,000. The project has high sustainability goals including the requirement for both structures, as a minimum, to receive LEED Gold Certification. The energy use index range for this project shall be between 30-40 kbtu per square foot. Title 24 shall be surpassed by at least 10% in the Energy Compliance Performance Model. The new construction is expected to be a Type 1A structure. Project milestone, Onsite Construction, completion is scheduled for May 28, 2028. The University Student Union building is located between the "upper" and "lower" campus on the California State University campus. The street address is 1250 N. Bellflower Blvd, Long Beach, CA 90840. The existing University Dining Plaza Building is located just southwest of the USU. The existing elements primarily include the University Student Union Building, University Dining Plaza Building, and the project site area. Design-Build subcontractors will be required to provide the following items/services: preconstruction services including coordination meetings, pricing updates, value engineering, adoption of 100%DD design documents and engineered design services through 100% CD documents and permitting, professional liability insurance during the preconstruction phase, and construction of the following scope ofwork: 1. HVAC Equipment 2. Ductwork and Air Distribution 3. Hydronic Piping and Equipment 4. BMS Controls The PENTA Building Group reserves the sole right to waive any irregularities or requirements, or provide additional opportunities to prequalify, if insufficient responses for prequalification are received. Risk Management Prequalification: Subcontractors are encouraged to begin the risk management prequalification process with PENTA immediately. Risk Management Prequalification packages can be obtained by contacting: anoureddine@pentabldggroup.com, zhagan@pentabldggroup.com.