Site work and paving for a civil project in Atherton, California. Completed plans call for site work for a road / highway; for paving for a road / highway; and water / sewer project.

The project scope consists of pavement repairs, rehabilitation, and overlays, including: Grinding and replacing approximately 27,625 square feet of asphalt to a six-inch depth on various streets. This work includes all necessary traffic control, grinding, sweeping, tack coating, replacing asphalt to appropriate depth in an appropriate number of lifts, and finishing rolling per Town of Atherton Standard specifications and special provisions. Some hand work around utility manhole covers will be required. Grinding and replacing of approximately 70,000 square feet of asphalt for 2 inches of asphalt concrete pavement on Various Streets. Once the roadway is grinded down, the contractor and the Town's project engineer shall identify any pavement failures for repairs. Grind and replace (digouts) asphalt to a 6-inch depth from the milled surface: then contractor shall perform crack sealing (per specification). Some hand work around utility manhole covers will be necessary. Repave the entire street with a self-propelled paver & finish per Town Standard Specifications. Reconstruct manhole to grade at Southgate Drive/Park Drive, including root removal and pavement repairs. Replacement and installation of traffic striping, pavement markings, and markers. Questions regarding the project should be directed to Robert Ovadia, PE, by written Requests for Information (RFI) to: Public Works Department, 80 Fair Oaks Lane, Atherton, CA 94027, no later than eight (8) business days before bid opening. RFIs may be emailed to jmirsaidi@interwestgrp.com