Site work for a water / sewer project in Cleveland, Texas. Completed plans call for site work for a water / sewer project.

The Project is generally described of completing one Gulf Coast Aquifer Water Well by drilling 1,410 feet of 8 3/4- inch pilot borehole; set of geophysical logs (one triple-combo suite of logs); reaming or drilling approximately 1,050 feet of 26-inch diameter borehole; furnishing, installing, and pressure cementing approximately 1,092 feet of 20-inch steel casing; underreaming approximately 320 feet of 24-inch diameter borehole beneath the casing; furnishing and installing approximately 215 feet of 14-inch steel liner and 215 feet of 14-inch pipe-based stainless steel screen; furnishing and installing approximately 410 feet of filter pack; 200 hours of development via air lift pumping with surge block; 36-hour aquifer test, including recovery; water quality sample from the constructed well, including three consecutive passing bacteria samples; furnishing and installing a 2,000 gpm vertical turbine lineshaft pump with 250 H.P. motor on 400 feet of 10-inch steel column pipe; and completing the wellhead with concrete pad and accessories up to the water meter, per technical specifications in the contract documents Engineer's Estimate is $2.1M. The right is reserved by the City of Dayton, as the City's interest may require, to accept or reject any or all bids, and to waive any informality in the bids received. Bid Security, only in the form of 1) a certified or cashier's check drawn on a Texas bank and made payable to the City of Dayton; or 2) a bond executed by a surety company authorized to do business in Texas, in the amount of not less than five (5%) percent of the total bid, must accompany each bid at the time it is submitted. Bids must be submitted on the form shown in the Contract Documents. A Contractor Qualification Statement must also accompany each bid. Upon award, the successful bidder will be required to furnish payment and performance bonds. Question Deadline 04/29/2025