Renovation of a military facility in Vicksburg, Mississippi. Completed plans call for the renovation of a military facility.

W912EE This is a combined synopsis/ for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. Period All work on the generators shall be completed no later than July 31, 2025. The Bidder/Offeror Inquiry Key is: 9UZBCZ-65EJUD Scope of Work The Mat Sinking Unit requires therepair of two General Electric motors and one generator. The equipment is usedon Matboat 4801 for the vessel's gantry cranes. The specific requirements of thejob are listed below. Allrequired work will not be known until the units can be completely disassembled,therefore the contractor shall quote a price for a maximum, worst-case scenariorebuild for the equipment. Work shall include but may not be limited to thefollowing requirements: Motor Specifications: Motor 1: Model - 5CD445E577, Serial: DD-1-209,1750 RPM, TEFC-WP Enclosure, 240V, 172 Rated Amps, 6.5 Field Amps, 36 FieldOhms, 50 HP, Continuous Motor Motor 2: Model - 5CD404E524, Serial: BC1-538,1750 RPM, WPFC Enclosure, 240V, 205 Rated Amps, 6.45 Field Amps, 9.0 FieldOhms, 30 HP, Continuous Motor Generator - 5CD286G312, Serial: aRequirements for Both - Retrieve machine - Clean& check parts - Replace communicator as needed - Rewind armature, fields and interpols as needed - Replaces hafts - Perform precision dynamic balance - Reseal as needed - Reassemble machine - Test machine - Paint machine as needed - Deliver back to USACEDD-1-238, 1750 RPM, TEFC-WP Enclosure, 250 V, 26 Rated Amps, 2.11/14.56 FieldAmps, Field Ohms 68.72/3.73, Continuous Motor