Renovation of a military facility in Oklahoma City, Oklahoma. Completed plans call for the renovation of a military facility.

Only the MAC BOA Holder GCs that attended Site Visit on 22 May 2025 will be able to continue forward toward the award. Updated 13 Jun 2025 Uploaded WWYK230052 RFI Responses COR Signed. ***New Submittal Register will be uploaded when available*** Only the MAC BOA Holder GCs that attended Site Visit on 22 May 2025 will be able to continue forward toward the award. This posting is for Tinker AFB - MAC BOA Holders ONLY. Project Solicitation Number: FA813725R0033 Project Title: WWYK230052, Replace Vault and Fuel Tank, B1032 Project Location: Tinker AFB - B1032 Remove existing concrete vault, fuel tank and vault at B1032(diesel) and associated accessories (underground fuel lines, conduit, vent piping, etc) and install4 new fuel tanks, associated accessories, and fill stations inside B1032.1) Construction only contract; Remove the existing concrete vault, fuel tank, and all associated piping andaccessories and install 4 new fuel tanks inside B1032, and all associated piping andaccessories. This project will require Contractors be a licensed underground storage tank installer / remover with the Oklahoma Corporation Commission. Project specific documents are attached to this posting. If you experience any difficulty at receiving or access to the project specific documents, send an email request to Contracting Points of Contact listed to have a DoD Safe document transmission. In the email, please provide email addresses for Prime Contractor ONLY points of contact to have the DoD Safe link sent to. Do not include any Sub-Contractor email addresses. Currently, the Solicitation - Request for Proposal (RFP) is in the draft stage and will be posted once available. This posting is for Tinker AFB - MAC BOA Holders ONLY. After review of the project specific documents, if you are a Tinker AFB - MAC BOA Holder, please send an email to the Contracting Points of Contact as an RSVP stating you are interested in attending the Initial Visit. Your RSVP email be received by Monday, 19 May 2025 2:00 PM CT. In your RSVP, please let us know if all personnel that will be attending the Initial Visit have base access. If anyone requires base access, you forward with your RSVP the Entry Access List (EAL) so that we can know how many personnel require base access. After receipt of your RSVP and EAL if , the visit will be conducted 22 May 2025, 9:00 AM - 10:00 AM, You attend the Initial Visit for the project to be considered eligible to propose. Current date and time for visit is 22 May 2025, 9:00 AM CT - 10:00 AM CT Location: Building 1032 This posting is for Tinker AFB - MAC BOA Holders ONLY. Estimated Range is between 500,000 and 1,000,000 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The work to be performed under the terms of this Order consists of furnishing all materials, labor, plant, tools, transportation, equipment, testing services, quality control and incidentals required to accomplish the Replace concrete vault, fuel tank inside vault [1032 (diesel) and associated accessories (underground fuel lines, conduit, vent piping, etc.) at Tinker Air Force Base (AFB), Oklahoma (reference the project drawings for additional location information). The Contractor shall perform a site investigation to verify existing conditions. If necessary, additional as-built drawings are available from 72 ABW/CE - Engineering Support, located in B400. The Contractor shall be responsible for identifying the necessary logistical, architectural, and structural work elements required to perform the work as described herein. Assemblies, framework, fixtures, or apparatus not readily identified on the project drawings, specifications, or this Statement of Work (SOW) shall be provided by the Contractor as required for a complete, fully operating, and functioning system or systems ready for use by the Government. Information such as floor plan layouts and dimensions; structural, mechanical, and electrical data; and location of underground utilities provided by the Government for existing and new construction are based on available as-built documentation, field observation, and equipment selected as design basis by the Government. This information is to be considered approximate and shall be field verified by the Contractor