Renovation of a laboratory facility in Ottawa, Ontario. Completed plans call for the renovation of a laboratory facility.

An overview of the scope of work for the Temp Site Security Hardware & Cameras is as follows. Note that this is not an exhaustive list, and the full scope of work will be determined and communicated to the prequalified proponents during the tender stage. The Contractor shall furnish all labour, materials, equipment, cabling, programming, testing, and commissioning for the complete supply and installation of: _ An Access Control System (ACS) o contactless card readers (indoor & outdoor) o turnstiles (interior/exterior) o controllers o electric strikes o workstation _ A Video Surveillance System (VSS) o Camera survey o Interior/exterior cameras o Video Management System _ An Intrusion Alarm System o locally and/or 3rd party remote monitored All systems shall be installed in accordance with applicable codes and standards. The Contractor shall also provide all associated network equipment (switches, PoE injectors, antennas, etc.) and coordinate all required electrical needs with the Construction Manager (CM). Indigenous Participation Plan requirements (IPP) Contribution to Indigenous initiatives may be required in all three categories mentioned below as per the project's IPP. Contribution categories are as follow: 1. Skills development & other measures. 2. Human resources. 3. Subcontracting. Further details and requirements will be part of the project tender documents The project includes construction of a new laboratory building of approximately 30,000 sq meters with a dedicated central utility plant to support the laboratory system and approximately 3000 sq meters consisting of two farm buildings, Guard shack. The project also involves construction and installation of geothermal system and modifications to the civil infrastructure in the existing campus to serve the new construction. An overview of the scope of work for the Temp Site Security Hardware & Cameras is as follows. Note that this is not an exhaustive list, and the full scope of work will be determined and communicated to the prequalified proponents during the tender stage. The Contractor shall furnish all labour, materials, equipment, cabling, programming, testing, and commissioning for the complete supply and installation of: An Access Control System (ACS) - contactless card readers (indoor & outdoor) - turnstiles (interior/exterior) - controllers - electric strikes - workstation A Video Surveillance System (VSS) - Camera survey - Interior/exterior cameras - Video Management System An Intrusion Alarm System - locally and/or 3rd party remote monitored Question Acceptance Deadline: 2025/06/05 05:00:00 PM EDT Initial Installation Period: September - December 2025. Official bid documents must be obtained from www.merx.com Any questions or requests for clarification during the solicitation period must be submitted by the Proponent via email at: Attention: Adam O'Keeffe, Security Manager, aokeeffe@pcl.com CC: Patrick Perras, Lead Design / Project Manager, pperras@pcl.com CC: Jason Smith, Construction Manager, jesmith@pcl.com * The project value listed reflects the package estimate.