Site work and paving for a civil project in Burin, Newfoundland. Completed plans call for site work for a road / highway; for paving for a road / highway; bridge / tunnel; and water / sewer project.

Closing Time: 12:00 PM (NT) Question Acceptance Deadline 2025/06/13 12:00:00 PM NDT Rehabilitation of Sections of Routes 221, 221-10, 222 The Work will be substantially performed within 4.0 months from the date of notification of award of contract or September 30th 2025, whichever is later. Asphalt overlay of Route 221, km 0.3 to km 3.6. Work will generally include, but not limited to: Mobilize and set up traffic control, Ditching, grubbing, and clearing of various sections of the right of way, Replacement of deteriorated culverts with polymer coated culverts, Replacement of driveway and sign island culverts with aluminized culverts complete with hand laid sod rip rap, Replacement of guide rail and signage, Spot level selected rough areas of pavement, Resurface roadway with 30mm average thickness levelling course and 50mm surface course asphalt complete with tack coat between all layers, Adjustment of manholes and water valves, Shoulder the roadway with granular 'B' as directed by the engineer, Install new guide rail and signage, Site clean up and demobilization. Asphalt overlay of Route 221-10, km 3.3 to km 7.3. Work will generally include, but not limited to: Mobilize and set up traffic control, Ditching, grubbing, and clearing of various sections of the right of way, Excavation of ditches which may include OM and solid rock, Scaling of rock to be completed in several areas beyond project limits, covered under contingency, Replacement of deteriorated culverts with polymer coated culverts, Replacement of driveway culverts with aluminized culverts complete with hand laid sod rip rap, Replacement of guide rail and signage, Spot level selected rough areas of pavement, Saw cut and remove deteriorated asphalt edges at various locations, followed by subgrade preparation and placement of granular "A", Resurface roadway with 30mm average thickness levelling course and 50mm surface course asphalt complete with tack coat between all layers, Adjustment of manholes, catch basins and water valves, Shoulder the roadway with or granular 'B' as directed by the engineer, Install new guide rail and signage, Site clean up and demobilization. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.