Site work and renovation of a service station / car wash facility in Mather, California. Completed plans call for the renovation of a 9,664-square-foot service station / car wash facility; and for site work for a service station / car wash facility.

The Contractor shall perform within the time stipulated the contract as herein defined, and shall provide all labor, materials, tools, utility services, and transportation to complete in a workmanlike manner all of the work required in connection with the following titled project in strict compliance with the Contract Documents as specified in Article 4 below, which shall be free from any and all liens and claims from mechanics, material suppliers, subcontractors, artisans, machinists, teamsters, freight carriers, and laborers required for the Project. Questions due June 13, 2025 Any questions pertaining to the bid documents are to be directed to the Public Q&A section of the project on SCOE's online bid platform, Bonfire. Questions must be received before 3:00 p.m. on June 13, 2025, All forms must be completed, signed, and returned with the bid. No bidder may withdraw its bid for a period of sixty (60) calendar days after the date set for the receipt of bids. The successful bidder shall file a payment bond issued by an admitted Surety authorized to conduct business in the State of California approved by SCOE. A performance bond will also be required. This Project is a public works project and is subject to the payment of prevailing wages. The successful bidder and all subcontractor(s) shall comply with all applicable Labor Code provisions, which include, but are not limited to, the payment of not less than the required prevailing rates to all workers employed by them in the execution of the Contract, the employment of apprentices, the hours of labor and the debarment of contractors and subcontractors. Each Bidder submitting a bid must be a Department of Industrial Relations registered contractor pursuant to Labor Code section 1725.5 ("DIR Registered Contractor"), unless an exception expressly provided in the Labor Code applies. This project is subject to compliance monitoring and enforcement by the DIR. If awarded the Contract, at all times during performance of the work, the Bidder and all Subcontractors of any tier shall be DIR Registered Contractors and continue to comply with all DIR requirements. This Contract is not subject to prequalification pursuant to Public Contract Code section 20111.6. Each bidder shall be a licensed contractor pursuant to the Business and Professions Code and shall be licensed in the following classifications: A or B. No bid will be accepted from a contractor who has not been licensed in accordance with the California Business and Profession Code at the time the bid is submitted. SCOE reserves the right to reject any or all bids, to accept or reject any one or more items of a bid, or to waive any irregularities or informalities in the bid or in the bidding process. Facsimile or electronic copies of the bid will not be accepted. Bids received after the above-specified time may be rejected. Work Included: 1. To ensure that specified products are furnished and installed in accordance with design intent, procedures have been established for advance submittal of design data and for its review and acceptance or rejection by Architect. 2. Make all following submittals to Architect for review, in strict accord with provisions of this Section: a. Progress Schedule b. Schedule of Values c. Shop Drawings d. Product Data/Material Lists e. Samples f. Substitutions g. Maintenance/Operating Manuals h. Guarantees i. Extra Stock j. Subcontractor List k. Request for Information (RFI) A. This specification defines the seismic design criteria to be used for the design of equipment anchorage and seismic bracing for electrical equipment/components. This section provides guidelines and limitations for supporting all electrical items from the building structure, and for seismic bracing for all such items. B. The Contractor is responsible for engaging the services of a qualified licensed professional engineer in the state of California with a minimum 5 years of experience in structural seismic design to provide the analysis, calculations, seismic bracing, and installation details for equipment and equipment anchorage, skids and frames in accordance with specified criteria and applicable codes. The Contractor's engineer is to provide construction support during the equipment installation for any field problem that may arise during construction. The Contractor is required to design support and bracing for items for which the contract documents do not provide specific attachment, support, and bracing. C. Unless the item is classified by the owner as essential, seismic bracing and restraint may be waived for the following. 1. Anchorage for equipment with operating weighs less than 400 pounds and is supported at 4 feet or less above the floor. 2. Temporary or movable equipment when rolling/sliding is prevented and is not subject to tipping. 3. Equipment weighing less than 20 pounds supported on vibration isolators. 4. Equipment weighing less than 20 pounds suspended from the floor or roof or mounted to walls. 5. Verification and investigation on Item C.2, whether the equipment will be tipped over under the code required seismic forces using R=1.0 and 60% of the operating weight, shall be performed by a qualified engineer per Paragraph 1.01B. D. Seismic bracing is not required for the following items: 1. All electrical conduits less than 2.5 inches inside diameter, unless racked together. 2. All conduits mounted less than 12" from hanger anchorage. E. Design and install all support and bracing systems except as noted. Provide for attachment to portions of the building structure capable of bearing the loads imposed. Design systems to not overstress the building structure The Sacramento County Office of Education is seeking bids for 10520 Armstrong Tenant Improvements, Fire Alarm System and Fire Sprinkler System at 10520 Armstrong Rd., Mather, CA 95655. See attached specifications for scope.