Site work for a road / highway in Columbia, South Carolina. Completed plans call for site work for a road / highway.

Pre-Demolition Requirements: Site Photography: Prior to demolition, the contractor shall photograph the existing conditions around the entrance sign site and the surrounding Lexington Medical property. These photographs shall be submitted to the Owner at the Pre-Construction meeting. Restoration of Site Conditions: The contractor shall be responsible for restoring the site to its pre-construction condition prior to substantial completion. Sediment and Erosion Control: The contractor shall implement all necessary sediment and erosion protection measures in accordance with state and local regulations. These measures shall be maintained as required by the SC Department of Environmental Services and local erosion control regulations. Permits and Approvals: The contractor shall comply with all SCDOT permit requirements and provisions. No work shall commence until all necessary permits have been approved by the relevant authorities. The contractor shall be responsible for all traffic control measures as required by SCDOT. Demolition Work: The contractor shall be responsible for all demolition work as shown on the Sheet D1, latest edition. This includes the removal of the existing asphalt driveway, adjacent vegetation, and three arborvitae shrubs within the right-of-way (R/W). Any area disturbed by these activities shall be stabilized with sod as specified. Field Staking and Layout: The contractor is responsible for field staking all construction elements and reviewing the layout with the Owner before any work begins. If discrepancies are discovered between scaled dimensions and the layout, the contractor must stop work and immediately notify the Owner's representative. Site Grading and Compaction: The contractor shall provide their own line and grade. The site must be graded as directed within the limits of disturbance shown on Sheet G1. The contractor is also responsible for compacting the subgrade as specified. Signage Installation: The contractor shall be responsible for the installation and fabrication of all signage elements as detailed on Sheet DT1, latest edition. The contractor must submit shop drawings for all fabricated pieces to the Owner for approval prior to fabrication. Electrical Work: The contractor shall install and coordinate all electrical work as specified on Sheets E001 and E002, latest edition. Any disturbances occurring during the installation of electrical work shall be sodded as specified. Trenches shall be properly compacted to prevent settling. Landscaping and Irrigation: The contractor shall install landscaping as specified. All plant materials shall be irrigated using a drip irrigation system. The contractor is responsible for tying into the provided irrigation system for the installation of the drip irrigation system. Restoration of Undisturbed Areas: Any area disturbed or damaged, but not specified for new construction or landscaping, shall be restored to its pre-construction condition. *The value for this project is based on a financial range of $190,000 - $250,000. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Every request for such interpretation should be via email to dcheatham@kbsala.com addressed to Drew Cheatham. To be given consideration, such request must be received at least ten (10) days prior to the date fixed for the opening of Bids Question Deadline 06/20/2025