Renovation of a residential development in Miami, Florida. Completed plans call for the renovation of a residential development.

Scope of Work Pages 1 - 9 Folio # 30-6925-009-1560 Work Site Address: 12301 SW 250 Terrace REPLACE BATHROOM EXHAUST FAN: Furnish and install a new 100 CFM exhaust fan with 1 sone or less in the ceiling Remove any attic insulation from around the fixture. The bathroom exhaust fans must have a minimum mechanical exhaust capacity of 50 cfm (cubic feet per minute) when operated intermittently Efficiency and quiet equipment at time of installation completed. Exhaust air from bathrooms must be exhausted directly to the outdoors with bugs screening and cannot be recirculated within the residence or discharged into an attic, crawl space, or other areas inside the building. Securely mounted fan using mechanical fasteners and per manufacturer's specifications so that fan housing does not shake, rattle, or vibrate when operating and, Ensure fan and service disconnect switch are accessible for maintenance according to NEC, or applicable building code Material and methods must meet the requirements of the applicable fire safety code (e.g., thermal or ignition barriers), and comply with Miami-Dade County mechanical building codes regulations and Weatherization Program Guidelines. Labor & materials maximum allowable cost $400.00 per bathroom. Follow sws work specifications. Materials __________ location: bath 1 & bath 2 labor ______________ quantity: 2 repair or replace dryer ventilation: select dryer transition ducting materials that are ul 2158a approved and less than 8 feet in total length with no joints. Select primary dryer ducting material that is 28-gauge metal with a smooth interior smooth airflow that does not collect lint be ul approved for dryers be installed according to manufacturer specifications be airtight when dryer is operating safe and airtight lint collection. Vent all clothes dryers outdoors, install a dryer booster fan that is listed and labeled to ul 705 for dryer ducts exceeding 35' in equivalent length. Install ducts according sws work specifications detail for "Ventilation ducts" dryer ducted too outdoors durably and effectively. If a lint collection device is installed, it must: be ul approved, for dryers to be installed according to manufacturer specifications be airtight when dryer is operating. Safe and airtight lint collection. Vent dryer through a termination manufactured for use with dryers that include a backdraft damper. Follow sws work specifications. If you have any questions, contact Martha Perez at 786-469-4729.