Renovation of a municipal facility in Fresno, California. Completed plans call for the renovation of a municipal facility.

All proposals must be made on the Bid Proposal Form provided by the Purchasing Manager. A Bid Deposit, which can be provided separately, in the amount of TEN PERCENT (10%) of the Total Net Bid Amount (or, in bids with Add Alternates, the highest possible combination of the Base Bid plus Add Alternates) in the form of a certified or cashier's check, an irrevocable letter of credit, or a certificate of deposit or a bidder's bond executed by a corporate surety, admitted by the California Insurance Commissioner to do business in California, payable and acceptable to the City of Fresno; or the Bidder shall have registered with the Purchasing Manager of the City an annual bid bond sufficient to provide coverage in such amount. All Bid Deposits will be held until a Contract has been executed with the successful Bidder or all bids have been rejected. Copies of Bid FAX Maintenance Building HVAC Equipment and Roof Replacement, Bid File 12501683 The scope of work includes replacement of the rooftop HVAC equipment and roof replacement. to the Fresno FAX HVAC Bus Maintenance Facility. Mechanical scope of the work includes: 1. Replace the makeup air units (MAUs) on the roof. The ductwork associated with the MAUs will be partially demolished and reconstructed. Provide units with the new curbs. 2. Replace the roof mounted heating and ventilation units (HVs). The ductwork associated with the HVs will be partially demolished and reconstructed. Provide units with the new curbs. 3. Replace the roof mounted packaged air handling unit (AC) 4. Replace the associated thermostats for MAUs, HVs and AC. 5. Provide bid alternate for the new building management system. 6. Replace the roof-mounted exhaust fans. Field verify the existing curbs. Install a new curb or curb adapter on the existing for the new fans. 7. Disable the CNG detection system and remove existing CNG exhaust fans. Seal the roof openings. 8. Provide temporary HVAC equipment during the construction to maintain the facility in operation continuously. 9. Testing and balancing the HVAC system. Electrical scope of work includes: 10. The existing electrical panels and conduits to remain in place unless otherwise noted. 11. Contractor shall remove the existing circuit breakers, conductors feeding the equipment in scope of work such as air compressors, air-conditioning units, exhaust fans, exhaust CNG fans, make-up air units, heating ventilation units and supply fans. existing conduits to remain in place unless otherwise noted. 12. Contractor shall install new circuit breakers and conductors to serve the equipment in scope of work such as air compressors, air-conditioning units, exhaust fans, make-up air units, heating ventilation units and supply fans. existing conduits to remain in place unless otherwise noted. 13. Contractor shall remove the existing disconnecting switches and mechanical switches as applicable on the equipment in scope of work such as air compressors, air-conditioning units, exhaust fans, exhaust CNG fans, make-up air units, heating ventilation units and supply fans. existing conduits to remain in place unless otherwise noted. 14. Contractor shall provide power connection to new fusible disconnecting switches and mechanical switches as applicable on the equipment in scope of work such as air compressors, air-conditioning units, exhaust fans, make-up air units, heating ventilation units and supply fans. existing conduits shall be extended as needed to serve the proposed equipment. Any questions concerning Disadvantaged Business Enterprise (DBE) issues shall be addressed to DBE Program staff at telephone number (559) 621-1154 or email at DBE@fresno.gov. Question Deadline 08/05/2025 Any questions or concerns relating to these Specifications shall be directed in writing to the designated Procurement Specialist of the Purchasing Division TAMRA TORRENCE Purchasing@Fresno.Gov (559) 621-1153 A 100 percent Payment Bond and 100 percent Performance Bond for all public works contracts must be filed with the Contract Documents and approved by the City before the Contractor enters upon performance of the Work. Although there is no specific goal or requirement to use participation by Disadvantaged Business Enterprises (DBE) for this project, The City of Fresno highly encourages the participation of Disadvantaged Business Enterprises (DBE). The City of Fresno encourages all prime Contractors to utilize qualified SBE (Small Business Enterprise) sub-Contractors on the City of Fresno projects and promotes the direct purchase of goods from qualified SBEs by utilizing SBE/DBE vendors when such vendors are available, and the price of the goods or services sought is reasonable. The City reserves the right to reject any and all bids at its sole discretion. Bidders are advised that as required by the Fresno Municipal Code, the City of Fresno is implementing new National Targeted Worker requirements for public work of improvement contracts over $200,000. The mandatory participation level for National Targeted Workers is 15%