Renovation of an office development in Boise, Idaho. Completed plans call for the renovation of a office development.

ADM Chinden Campus Building & Replace Roof A description of the Work of this project can be summarized to include: Remove existing mechanically attached metal roofing system, 3/4 " EPS insulation board, original (3) ply - B.U.R. and fiberglass insulation down to the structural steel roof deck. Install new single-ply roofing system consisting of 80 mil TPO Roofing Membrane fully adhered (1) layer of 2.6" polyisocyanurate over mechanically attached self-adhering vapor barrier over (1) layer of 2.6" polyisocyanurate. A bid bond in the amount of 5% of the total bid amount, including any add alternates, is required. AMOUNT AND FORM OF SECURITY: To be considered, bids must be accompanied by an This acceptable bid security in an amount not less than five percent (5%) of the total amount of the bid, including additive alternates. The security may be in the form of a bond or a certified or cashier's check. A standard surety bid bond form meeting all the conditions of AIA Document A310 is acceptable and, if used, must include a certified and current copy of the power of attorney if the bond is executed by the attorney-in-fact on behalf of the surety. PERFORMANCE AND PAYMENT BONDS: A performance bond and payment bond are required for this Project, each in an amount of not less than one hundred percent (100%) of the Contract Price. The performance and payment bonds shall be AIA Document A312, 1984 or the most recent Edition, or a standard surety form certified approved to be the same as the AIA A312 form and shall be executed by a surety or sureties reasonably acceptable to the Owner and authorized to do business in the State of Idaho. Bonds must be provided within ten (10) calendar days following receipt of a Notice of Intent to Award. REJECTION OF BIDS, WAIVER OF INFORMALITIES OR CANCELLATION: Prior to the effective date of a contract, the Administrator of the Division of Public Works shall have the right to accept or reject all bids, to waive any minor deviations/informalities or to cancel the bid. Question Deadline 06/27/2025 Questions concerning a bid must be directed in writing to the designated Design Professional (architect or engineer)