Site work and paving for a mixed-use development in Hemet, California. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

The scope of work generally consists of, but is not limited to the clearing, grubbing and removal of existing, sidewalk, curb, cross gutter, driveways, posts, cross gutter, and landscape. The construction of ADA curb ramps, sidewalk, curb and gutter, driveways, cross gutters, pavement restoration, sign relocation, mailbox relocation, and adjusting valves, manholes, and meter boxes to finished surface. LOCATION OF WORK :- The work to be constructed is located on the following locations Gilbert St from Oakland Ave to Menlo Ave Santa Fe Ave from 700 feet south of Menlo Ave to Menlo Ave Northeast Corner of Latham Ave and Palm Ave Southeast Corner of Buena Vista St and Oakland Ave Northeast Corner of Buena Vista and Date St South of Santa Fe St and Oakland Ave Southwest Corner of Latham Ave and State St The following streets and limits are potential additive for this project Alessandro St from Oakland Ave to Menlo Ave Fruitvale Ave from State St to 400 feet east of State St Online Q&A Yes Q&A Deadline 06/19/2025 3:00 PM (PDT) Bid Bond 10.00% Payment Bond 100.00% Performance Bond 100.00% Liquidated Damages $2,000 per day Project Duration 50 working days Project Type Bid Response Types Line Items Type of Award Lump Sum Project sign(s) shall conform to the following requirements: o Outside sign dimensions shall be 4' x 8'; material shall be 3/4" marine grade plywood substrate painted white both sides and edges, or approved equal, with 1" wide black border o Printing shall be black, except city logo, using latex or eco solvent UV inhibited ink o City will provide "initial proof" layout in digital format. Contractor shall provide "final proof" layout for city approval. o Contractor shall provide photo of actual sign to city for approval prior to installation o Contractor shall install signs at project site at locations approved by engineer o Sign shall be securely mounted on 2 - 4"x4" wood posts set 5'(min) into stable earth. Sign shall be 18" (min) clear of vehicular and pedestrian travel ways. Bottom of sign shall be 7' (min) above finished grade. o Contractor shall be responsible to maintain sign in good condition, graffiti free, for the duration of the project and at the completion of the project shall remove the sign and posts, restore area to pre-existing condition, and deliver it to the City