Site work and paving for a road / highway in Rochester, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Rochester Township 2025 Paving Program Invitation, preparation, submittal, bidding requirements, all materials furnished and all work shall conform to the current specifications of PennDOT Form 408, current edition and appropriate bulletins. Contractor must be PennDOT pre-qualified in work classification codes C1, F, F1 & F3. Requests for clarification must be submitted by email only to bids@widmerengineering.com. All work must be completed in sixty (60) calendar days from Notice to Proceed (NTP). The Township reserves the right to waive any informalities or to reject any or all bids, and to award the contract to the best interest of the Township. 9000-0001 - BASE REPAIR - 10" EXCAVATION, 6" SUBBASE & 4" MILLINGS (10% OF SY) This work consists of excavation and backfill for the roadway base repair as directed by the Engineer. LAWN RESTORATION (MINIMUM WIDTH 3 FT) This work consists of supply and installation of all materials necessary to restore all lawn areas and stone driveways. All materials and construction requirements shall be in accordance with applicable sections of PennDOT Form 408, Sections 802, 804 and 805, and as specified in Section 2 of these Specifications and the detail drawing appended to these Specifications. Asphalt Wedge Curb - This work is the placement of asphalt wedge curb, using wearing course, as directed or as shown below. This section will be in accordance with PennDOT Publication 408 2020 current edition, Section 413 and as follows Asphalt Seal Coat, Double Application This work is two applications of bituminous material, each immediately followed by application of coarse aggregate in accordance with Section 470 of PennDOT publication 408, latest revision, except as modified herein.