Site work and renovation of an educational facility in Massapequa, New York. Completed plans call for site work for a educational facility.

First floor student ada toilet alterations & site work at charles e. Schwarting elementary school, Contract C-1: Site Construction. the District further reserves the right to reject bids that contain conditions, omissions, exceptions or modifications, or in its sole discretion to waive any irregularities in the bids, or to reject any or all bids, or to accept any bid which in the opinion of the District is in its best interest. Each bid must be accompanied by a certified check payable to PLAINEDGE UNION FREE SCHOOL DISTRICT or by a Bid Bond in an amount equal to ten percent (10%) of the bid conditioned as set forth in the "Instructions to Bidders" of the Bid Specifications. All bid security, except those of the three lowest bidders will be returned within ten (10) days after bids are submitted. The bid security provided by the three lowest bidders will be returned after the execution of the Trade Contract. The District will require the successful bidder to provide separate Performance and Labor & Materials Payment Bonds in the amount of the contract price and in the form specified in the Bid Documents. Each Bidder shall prepare their bid proposal, along with a bid security, in accordance with the terms and subject to the conditions set forth in the "Instructions to Bidders" and Bid Specifications. Attention of bidders is particularly called to the prevailing wage rates to be paid under the contracts. Wages to workers, laborers and mechanics employed to work on this project shall be paid in accordance with Section 220 of the Labor Law and in accordance with the Prevailing Rate Schedules found in the Project Manual. Proof of such payments will be required. The District will award a contract to the lowest responsible bidder providing the required security within forty-five (45) days of the date opening of the bids. To the fullest extent allowed by law, the District further reserves the right to reject bids that contain conditions, omissions, exceptions or modifications, or in its sole discretion to waive any irregularities in the bids, or to reject any or all bids, or to accept any bid which in the opinion of the District is in its best interest. Bid date notes: All bids shall be sealed and in an opaque envelope that is distinctly marked on the outside as follows: "Bid #25-002, First Floor Student ADA Toilet Alterations & Site Work at Charles E. Schwarting Elementary School" as required by the Bid Specifications. The name of the bidder, bidders address, and the name of the contract, and/or contracts being bid must also appear on the outside of the envelope. Event Pre-bid notes: Knowledge of the site is crucial to obtain a proper understanding of the Work. All bidders must be fully familiar with the site. Bidders shall visit the sites of proposed work and be fully familiarized with conditions as they exist, as well as the character of the operations to be carried on under the proposed contract. All visits must be scheduled & coordinated with Brett Prochazka, Director of Facilities, at (516) 992-7422 or by email to Brett.Prochazka@plainedgeschools.org Doc notes: Complete digital sets of Contract Documents shall be obtained online (with a free user account) as a download for a non-refundable fee of One Hundred ($100.00) Dollars under 'public projects'. Optionally, in lieu of digital copies, hard copies may be obtained directly from REVplans upon a deposit of One Hundred ($100.00) Dollars for each complete set. Doc notes: Plan deposit is refundable in accordance with the terms of the Instructions to Bidders to all submitting bids. Bidding Document costs are refundable provided the documents are returned to REVplans within thirty (30) days of the Bid Opening, and are COMPLETE, UNMARKED and in NOT TORN condition. Any bidder requiring printed documents to be shipped shall make arrangements with the printer directly and pay for all packaging and shipping costs. A. Extent of each type of masonry work is indicated on drawings and schedule. B. This Section includes unit masonry assemblies consisting of the following: 1. Concrete unit masonry. 2. Brick masonry. 3. Decorative concrete masonry units. 4. Pre-faced concrete masonry units. 5. Natural stone. 6. Concrete brick. 7. Mortar and grout. 8. Reinforcing steel. 9. Masonry joint reinforcement. 10. Ties and anchors. 11. Miscellaneous masonry accessories. C. Related Sections include the following: 1. 03300 - Cast-In-Place Concrete 2. 05120 - Structural Steel 3. 06100 - Rough Carpentry 4. 07200 - Building Insulation 5. 07231 - Air / Vapor Barrier System 6. 07600 - Flashing and Sheet Metal 7. 07900 - Caulking 8. 07910 - Joint Sealers 9. 08110 - Steel Doors andFrames 10. 08121 - FRP Doors and Framing 11. 08211 - Flush Wood Doors 12. 08360 - Upward Acting Sectional Doors 13. 08520 - Aluminum Windows A. Provide firestopping at all penetrations and juncture joints of fire-rated walls, floors and ceilings in accordance with the requirements of the Building Code of the State of New York and MEA Standards. A. Description The "Scope of Work" covered by these specifications involves the removal, disposal and or repair of asbestos containing, and/or asbestos contaminated materials, as follows: A.1 Remove and dispose of the following asbestos containing, and/or asbestos contaminated materials, see attached Asbestos, Lead & PCB Inspection Reports for locations. These asbestos specifications are to be utilized with all other specifications and drawings associated with the project. All asbestos containing material, and asbestos contaminated material abatement work shall be performed in strict accordance with the applicable provisions of New York State Department of Labor (NYS DOL) Industrial Code Rule 56 (12 NYCRR Part 56), United States Environmental Protection Agency (USEPA) AHERA (40 CFR Part 763), United States Occupational Safety & Health Administration (OSHA) and all other applicable federal, state and local laws, rules and regulations having jurisdiction over the work being performed, and shall include all aspects of worker safety & protection. All other materials and surfaces located within and around the regulated abatement work area that are not subject for removal shall be pre-cleaned and protected during the abatement project. The abatement work must be performed by a New York State Department of Labor (NYS DOL) licensed asbestos abatement contractor using only appropriately NYS DOL certified persons. The asbestos contractor is responsible for coordinating his work with the building owner and other contractors on site, as necessary, so that the building will be protected against any damage (i.e. security, weather, etc.) and all work is completed in a timely fashion as applicable.