Site work for a military facility in Slidell, Louisiana. Completed plans call for site work for a military facility.

Camp Villere Entrance Gate Questions about this procedure shall be directed to the Designer at Meyers Engineers, LTD, 4937 Hearst Street, Metairie, LA 70001. Phone (504) 885-9892 Attention: Alec Simonson. E-Mail Address: asimonson@meyer-e-l.com All Bids must be accompanied by Bid Security equal to live percent (5%) of the Base Bid and Additional Bid Items (ABI) and must be in the form of a certified check, cashier's check or bid bond. The successful Bidder will be required to furnish a Performance and Payment Bond written by a company licensed to do business in the State of Louisiana, equal to 100% of the Contract amount, including Additional Bid Items (ABI), if required. This work consists of preparatory work and operations, including, but not limited to, those necessary for the movement of personnel, equipment, supplies, and incidentals to the project site; for the establishment of all offices, buildings, and other facilities necessary for work in the Project, and the costs of bonds and insurance, and for all other work and operations which must be performed, or costs incurred for mobilization, prior to beginning work on the various construction times on the Project. Extent of landscape development work is shown on drawings and in schedules. Subgrade Elevations: Excavation, filling and grading required to establish elevations shown on drawings. The Surge Protection Device (SPD) covered under this section includes all service entrance type surge protection devices suitable for use as Type 1 or Type 2 devices per UL1449 4th Edition, applied to the line or load side of the utility feed inside the facility. A SPD located at Service Entrance and Distribution and Branch Panels, Switchgear, Motor Control Centers, and Switchboard assemblies as indicated on the drawings. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to finish and install surge protection devises. A. For each access-controlled door or gate, provide equipment as indicated on the drawings. This includes but not limited to, keypads, video intercom stations, power supplies, maglocks, request to exit pushbutton, and request to exit motion detectors. B. Provide two master video intercom stations as indicate on the drawings. The master station shall allow the occupant to view the door station, and shall allow for the occupant to unlock the door from the master station. C. Provide all cabling as required for a complete system. Furnish all labor, materials, equipment, and incidentals required for clearing, grubbing, removing, and disposing of vegetation and debris within the limits of construction. Furnish all necessary materials, labor and equipment for the complete installation of formwork for cast-in-place concrete, with shoring, bracing, anchorage and other accessories, as shown on the drawings and specified herein. Provide all necessary supplementary items for a complete installation intended by documents. This section includes reinforcing bars, wire, mesh, accessories, etc. for concrete construction indicated on the Drawings and in specifications. Provide all necessary supplementary items for a complete installation intended by documents. Furnish all necessary materials, labor and equipment for the complete furnishings and installation of expansion joint fillers, joint sealer, concrete floor hardener, sealing compound and other accessories as shown on the drawings and specified herein. Provide all necessary supplementary items for a complete installation intended by documents. The deadline for questions is July 21, 2025, by 1:00 pm local time as per Addendum 1