Site work and paving for a mixed-use development in San Diego, California. Completed plans call for site work for a road / highway; for paving for a road / highway; and service station / car wash facility.

Electric Vehicle Supply Equipment - San Diego Location(s) : 817 Sweetwater Rd, Spring Valley, CA 91977 & 27174 CA-79, Santa Ysabel, CA 92070 Project No: 000000000013451 SFM Permit 24-2409 000000000014857 This project is being bid in accordance with Government Code 14838.7 and is open only to Small Business and Micro Business contractors certified through the California Department of General Services, Office of Small Business and DVBE Services. Project comprises labor, material and services necessary for: Major components of Project Work consist of install and electrically connect EVSE infrastructure to include wiring devices and all required associated items for a complete and operational system including required testing. Provide the required saw cutting, trenching, backfilling and finishing of the affected lot surface and restore to original condition. Bollards may be required on this contract even if not shown explicitly on the construction drawings. Provide and install all items shown on the drawings including the ADA accessible ports and as specified unless otherwise noted as not in contract or existing to remain. License required to bid the project: C-10 Certificate of Reported Compliance (CRC) - Fleet Vehicles: As a condition of Contract award, prior to Contract execution, Contractor shall submit copies of the valid CRCs for any fleet retained by the Contractor or any listed Subcontractor, for which any vehicles subject to the California Air Resources Board In-Use Off-Road Diesel Fueled Fleet Regulations, Section 2449(i), Title 12, California Code of Regulations, are used in the completion of the work included in the Contract. More information on the In-Use Off-Road Diesel-Fueled Fleets Regulation can be found at online Health and Safety Provisions: Contractor and all subcontractors shall abide by all health and safety mandates issued by federal, state, and local governments and/or public health officers as well as those issued by DGS, and worksite specific mandates. If multiple mandates exist, the Contractor and subcontractors shall abide by the most restrictive mandate. The term employee, worker, state worker or state employee in health and safety mandates includes contractor and subcontractor personnel. Costs associated with adhering to health and safety mandates are the responsibility of the Contractor. Contractor is responsible for the tracking and compliance of health and safety mandates and may be audited upon request. Successful bidder shall furnish payment and performance bonds, each in the amount of 100 percent of the Contract price. Availability of Funds: Award of this contract is subject to the availability of funds through the State's normal budget process and/or transfer of funds to the Department of General Services through the Architecture Revolving Fund. Prospective bidders must attend the mandatory pre bid site inspection tour at which time representatives of the State and prospective bidders shall meet virtually in the Microsoft Teams platform, at which time a site plan and video presentation will be presented to bidders. Attendance for the entire inspection is required in order for bidders to be eligible to submit a bid. It is recommended that all vendors register as a bidder through online. This will allow for automatic notifications if there is any modification to the Event such as the posting of an addendum or additional documentation. Bidders do not need to attend the bid opening as the Preliminary Bid Tabulation will be emailed to participating contractors immediately after the bid opening. States estimated cost: $59,714. The term of this project is 60 calendar days. The States Project Director is Sina Roudbari at (279) 799-4343.