Renovation of a pre-engineered storage facility in Montgomery, Alabama. Completed plans call for the renovation of a pre-engineered storage facility.

For Cif Warehouse Lighting Upgrades Modernization and Renovation, Montgomery, Al Questions Should Be Addressed, in Writing, to Anne Nieman at Pwba Architects, Inc., Anieman@pwba-architects.com No Later Than 2:00 P.m., Ct, Thursday, July 31, 2025. Certified Checks or Bid Bonds (Power of Attorney is Required) Payable to the Armory Commission of Alabama in an Amount Not Less Than Five (5) Per Cent of the Amount of the Bid, but in No Event More Than $10,000.00 Per Project, Must Accompany the Bidders Proposal. Completed Disclosure Statements Are Preferred to Accompany the Proposal. Performance and Payment Bonds Will Be Required at the Signing of the Contract. The Work performed under this Contract has been reviewed and found, to the Architect's best knowledge, information and belief, to be complete. Final Completion is the stage in the progress of the Work when the Work or designated portion thereof is complete in accordance with the Contract Documents so the Owner can occupy or utilize the Work for its intended use. The Date of Final Completion of the Project designated above is hereby established as the date of execution by the Owner as stated in the General Conditions, which is also the date of commencement of applicable warranties required by the Contract Documents. A. Provide equipment, labor, material, etc., required to make a complete working installation as shown or as specified. B. All equipment and materials shall be installed and connected in accordance with the best engineering practices and in accordance with the manufacturer's recommendations. 1. Where the Engineer determines that the Contractor has installed equipment not conveniently accessible for operation and maintenance, equipment shall be removed and reinstalled or remedial action performed as directed at no additional cost to the Owner. 2. The term "conveniently accessible" is defined as capable of being reached without the use of ladders, or without climbing or crawling under or over obstacles such as motors, fans, pumps, belt guards, transformers, high voltage lines, piping, and ductwork. 3. Contractor is responsible for dimensions and sizes of equipment. Inform Architect in writing of equipment differing from that shown. C. HVAC work includes, but is not limited to: 1. Obtain all permits and inspections including: building permits, health department permits and sewer tap permits. 2. Disconnect, remove and reinstall mechanical services located on or crossing through contract limits, above or below grade, obstructing construction of project or conflicting with completed project or any applicable codes. A. This section applies to all sections of Division 26. B. Furnish and install electrical wiring, systems, equipment, and accessories in accordance with the specifications and drawings. Capacities and ratings of motors, transformers, cable, switchboards, switchgear, panelboards, and other items and arrangements for the specified items are shown on drawings.