Site work for a transportation facility in Ontario, Oregon. Completed plans call for site work for a transportation facility.

**As of August 4th, 2025, this project has not yet been awarded. A timeline for the award has not yet been established.** The City of Ontario invites bids for the construction of the Ontario Municipal Airport East Fencing Project 2025. The City of Ontario is looking for an Oregon licensed Contractor to install approximately 2,655 LF of new 7' tall cyclone fencing, located at the Ontario Municipal Airport, Ontario Oregon. Project Summary: 1. This project will consist of installing approximately 2,655 LF of 11-gauge 7' cyclone fencing, top wire, and schedule 40 posts per supplied spec sheet. 2. Installing one new 20 LF gate opening consisting of two 10' LF, 11-gauge gate panels per supplied gate details. 3. Installing one new 18' wide cantilever electronic sliding gate, including electronic access keypad and all electrical per supplied fence details. 4. Reduction of scope of work - Reduce overall footage from the project if funding is not adequate. 5. This is not an FAA funded project and "Made in America" material is not required. Each bid on the project shall be submitted on the prescribed form, including any alternates and addendums, if required. Upon bid award, the successful bidder will promptly execute the Contract, secure payment of Workmen's Compensation Insurance. Bids shall be submitted in a sealed envelope plainly marked "Bid for the City of Ontario, Oregon, Ontario Municipal Airport 2025," and show the name and business address of the bidder or by emailing Assistant Project Director Al Haun at al.haun@jacobs.com. The Contract shall be subject to the applicable provisions of ORS 279.348 through ORS 279.380, the Oregon Prevailing Wage Law. All prospective bidders and their subcontractors shall be actively registered with the State of Oregon Construction Contractor's Board. Contractor shall complete all Work as specified or indicated in the contract documents. Contractor shall comply with the general conditions of the most current version of the Idaho Specifications for Public Works Construction (ISPWC); the Ontario Supplemental Standards dated 2020; and all other building, mechanical, electrical, and plumbing codes relevant to the project work. The Construction Work will be completed in all respects by September 30th, 2025. Bidder shall be qualified in accordance with the applicable parts of ORS 279C.430 to ORS 279C.450 in order to submit a bid for Public Work in Oregon. Bidders shall submit a statement identifying whether the bidder is a resident bidder as defined in ORS 279A.120. No bid will be received or considered by Owner unless the Bid contains or is accompanied by a statement by the bidder as a part of the bid that the provisions required by ORS 279C.840 pertaining to prevailing wages shall be included in the agreement. The City of Ontario reserves the right to reject any or all bids in accordance with ORS 279B.100 or any bid not conforming to the intent and purpose of the bidding documents. Any questions on the bid documents must be directed to Al Haun, Assistant Project Director, at 541-889-8572. A general description of the Work to be performed is contained in the "Invitation for Bid". The scope is indicated in applicable parts of these contract documents. The Contractor shall furnish necessary permits, materials, labor, tools, and equipment unless otherwise specified. Where plans are included with the contract documents, they are to be considered a part of the contract documents, and the scope may be indicated on the Plans as specified. Except as modified herein, the various Work items called for in the "Bid Proposal" shall be performed, measured, and paid for as indicated on the "Bid Proposal" and as provided in the most current Edition of the IDAHO STANDARDS FOR PUBLIC WORKS CONSTRUCTION (ISPWC), as amended by the City of Ontario Supplemental Standards dated 2020 The Owner will not be responsible for oral interpretations. Should a bidder find discrepancies in or omissions from bid documents, or be in doubt as to their meaning, he/she shall notify the Owner prior to the bid closing date. Responses to bid questions will be distributed to all Contractors bidding the project. Any and all such interpretations will be made only in the form of written addenda to the Specifications which will be sent via email to all prospective bidders receiving a set of such documents. All addenda so issued are to be acknowledged in the bid. Addenda to become part of the contract documents This will consist of installing approximately 2,655 7-foot-tall, 11 Gauge cyclone fencing with schedule 40 posts, installation of an 18-foot-wide cantilever electronic sliding gate, and the installation of a 20-foot-wide gate consisting of two 10' LF, 11-gauge gate panels. 1. Supply all material, and perform grading, and labors to construct 2,655 lineal feet of 7-foot-tall, 11 Gauge cyclone fencing with schedule 40 posts per supplied specs. 2. Supply all material, and perform grading, and labor to install an 20-feet wide (2 -10 ft gates) 7-foot-tall, 11 Gauge cyclone gate panels with schedule 40 posts 3. Supply all material and perform grading and labor to close an 18-feet wide cantilever electronic sliding gate per supplied specs