Site work for a civil project in Albuquerque, New Mexico. Completed plans call for site work for a water / sewer project.

Reference Number 0000393392 Description of Services: The following is a general description of work to be performed in accordance with the construction plan set and specifications prepared and stamped by AECOM for this project. The work associated with Digester #6 generally includes the removal of the cover and appurtenances, the cleaning, repair, and coating of interior concrete surfaces, the installation of a new stainless steel digester cover and appurtenances and the removal and installation of piping and valves within the piping gallery. Question Deadline 10/02/2025 at 1:45 PM MT Question deadline Extend From ( 09/19/2025 ) as per addendum 4 Questions are submitted online Yes . All questions should be directed to the Purchasing Administrator, Armida Magallanes at amagallanes@abcwua.org, mobile (505) 433-8727, or online A. This Section specifies the general methods and requirements of submissions applicable to the following work-related submittals: 1. Pre-construction video of digester 6 2. Shop Drawings 3. Product Data 4. Samples 5. Compact Disk (CD) of Construction Photographs 6. Construction and Submittal Schedules 7. Operation and Maintenance Data 8. Manufacturer's Instructions and Certificates 9. As-built Drawings 10. Asset Management Data 11. Monthly Progress Reports B. Detailed submittal requirements are specified in the individual specification sections. This section includes materials and application of painting and coating systems for the following surfaces: A. Submerged metal B. Exposed metal C. Buried metal D. Metal under thermal insulation E. Metal having thermally sprayed zinc or aluminum coatings F. Concrete and masonry G. Metal in contact with concrete A. Provide complete and operational systems for electric power systems, grounding systems and other specified systems, including the installation and wiring of miscellaneous equipment and devices. Perform all work and testing as indicated and specified. 1. Provide conduit, wiring and connections for power, control, instrumentation, and alarms for equipment specified and indicated. 2. New or upgraded equipment to be installed in accordance with Bernalillo County Construction requirements. Contractor is responsible for all necessary permitting. 3. Provide temporary circuits, overcurrent devices, conduit and wiring, and other equipment required during construction and change-over from existing to proposed electric system. Perform work at the convenience of the Owner. 4. Install all raceways and equipment to meet the seismic requirements in Albuquerque, NM. Raceways supports, and equipment anchoring shall be provided as specified in the Division 26 sections which form a part of the Contract Documents. 5. Disconnecting, removing, and relocating existing electrical equipment is a part of this Contract. Make equipment scheduled for removal free of shock hazard. 6. Provide electrical relocation work associated with the relocation of equipment for the existing and new facilities, including disconnecting all existing wiring and conduits and providing new wiring and conduit to the relocated equipment. Make equipment scheduled for relocation free of electrical shock hazard. 7. The equipment enclosure classification of the plant areas is indicated on the drawings. Provide all equipment, devices and material meeting the requirements for these area classifications unless otherwise noted or specified. A. Provide complete raceway systems, with matching accessories, fittings, boxes, and other hardware, as indicated and specified. When non-metallic raceway systems are specified, provide green insulated grounding conductor sized per National Electrical Code (NEC) requirements. B. All raceway runs are indicated diagrammatically to outline general routing of raceway. Unless specifically identified for installation in concrete walls or slabs, raceways shall be run exposed with raceway supporting systems. Avoid interfering with pipes, ducts, structural members, or other equipment. Any installation deviations from the contract requirements shall be corrected at no cost to Owner. C. Provide raceway systems in accordance with the following: 1. Within finished walls or ceilings, use EMT raceway systems. 2. In NEMA 12 or NEMA 1 areas, use rigid aluminum raceway systems. 3. In NEMA 4 areas, and where subject to wetting or wash down, use rigid aluminum conduit raceway systems. 4. In exterior building applications, use rigid aluminum conduit raceway systems. 5. In classified hazardous areas and areas designated NEMA 7 (such as Gas Rooms), use PVC coated rigid steel with tapered threads and sealing fittings as required by the NEC for hazardous applications. D. All raceway systems shall be installed in accordance with the criteria described in this section. Any proposed deviations from these requirements shall be submitted to the Engineer in writing for review and disposition. 1. Use Type 316 stainless steel support systems for exterior application and in NEMA 4 and NEMA 4X areas. 2. All NEMA 1 and NEMA 12 areas shall use hot dipped galvanized steel support systems. E. All raceways shall be supported to NEC requirements and to meet all applicable seismic criteria. Raceways 2 inch (50 mm) outside diameter or greater shall be independently supported in a manner to meet the criteria to resist failure during earthquake events. The work involves furnishing all hardware, installation, labor, material, equipment, and engineering in strict compliance with the contract documents. Programming changes to existing distributed control system are by Owner.