Renovation of an educational facility in Charlotte, North Carolina. Completed plans call for the renovation of a educational facility.

King and Memorial Hall Building Envelope Repairs (Facade) Purpose and Scope of Work The purpose of this study was to perform an evaluation of the above-referenced facility for the presence of ACMs, specifically those building materials which may be present or impacted during potential demolition or renovation activities. The activities and procedures used to accomplish this task were as follows: 1) A review of available building documents to identify potential locations of suspect ACMs; 2) Visual building inspection of accessible areas by a United States Environmental Protection Agency (EPA) Asbestos Hazard Emergency Response Act (AHERA) accredited asbestos building inspector to identify suspect ACMs; 3) Once identified, homogeneous materials (materials which are uniform in color, texture, construction/application date, and general appearance) were determined; 4) Determine whether the suspect ACM is Friable (a material that when dry, may be crumbled, pulverized or reduced to powder by hand pressure) or Non-Friable; 5) Collection of bulk samples of each homogeneous suspect ACM. Record sample information on Asbestos Bulk Sample Forms(chain-of-custody sheets), which were signed, dated, and sent with the samples to the laboratory; 6) Analysis of the collected bulk samples at a National Voluntary Laboratory Accreditation Program (NVLAP) accredited laboratory using Polarized Light Microscopy (PLM) for the presence of asbestos fibers; 7) If applicable, confirmatory analysis of bulk samples documented by PLM analysis as containing