Renovation of a military facility in Fort Worth, Texas. Completed plans call for the renovation of a military facility.

The existing Lacquer Preparation Facility at Holston Army Ammunition Plant, Kingsport, TN, comprising of Buildings 149/150 and a chemical/solvent storage tank farm, is the only facility capable of producing lacquer batches forthe production of all plastic bonded explosives (PBX). The facility receives, stores, handles, and processes the binder materials and solvents in manufacturing the lacquer in explosives production. Mobile wagons are used to transfer lacquer from the facility to the explosives production buildings. Lacquer is a mixture of dissolved rubbery polymer materials in asolvent that is used as a binding agent in reducing the sensitivity of RDX, HMX, and TATB based explosives formulations. A plasticizer instead of lacquer may also be prepared in the facility to be used as a feedstock raw material in formulating RDX based explosives. The Lacquer Facility supports legacy explosives and the new Insensitive Munitions (IM) explosives being developed at HSAAP. This effort will require Architect-Engineering (A-E) design services for a new Lacquer Preparation Facility with all the necessary process equipment to support annual production capacity expansion with a minimum of 15Mlbs of RDX and 2.5M lbs of HMX based formulations. This will ensure continuity of operations in maintaining the production capability, quality, safety, and environmental requirements to meet modern standards and permits. This new facility will support the expansion modernization of HSAAP RDX, HMX, and IMX production capacity to provide a viable capability to meet current/future DoD explosives production. Project Number: Ddpm252016 Naics: 236220 In Accordance With Federal Acquisition Regulation (Far) 36.204: Project Magnitude is Between $25,000 and $100,000 In Accordance With Far 19.502-2, This Acquisition is Set-aside for Small Business Concerns Under the Applicable Size Standard of the Previously Stated Naics Code Questions can be directed to the 136th Contracting Office via email at 136.aw.msc@us.af.mil. Requests for Information (RFIs): RFIs must be submitted in writing through email to 136.AW.MSC@us.af.mil. RFIs will not be accepted after 1:00 PM local on August 19, 2025 unless a response is deemed to be in the best interests of the Government. The contractor shall begin performance within 10 calendar days and complete it within 60 calendar days *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.