This is a service / maintenance or supply contract in Cincinnati, Ohio. Contact the soliciting agency for additional information.

Lighting Light Modification/ Upgrade(s) Light Tower Retrofit Must convert existing halogen style lights to LED. Must be greater than or equal to total current lumen count (model info listed below) Installation to be included. All functionalities must be retained including use of current hardware, remote and cast area (width of light beam) Must fit within existing lighting device. Current Device is a 2005 era Wil-Burt 5-15-158/168 fixture. These are apparently known as an "Appleton" style light Must function within existing system as described above Scene Light Retrofit Includes qty 8 replacement 12v scene lights from halogen to LED Installation to be conducted by recipient Lumen value of each individual light to be 10,000 lumens or greater Size of light to be approximately 7x9 Must include a retrofit gasket and associated bevel or bracket housing. Mast Must include a minimum 28' Remote Locking Pneumatic Mast size at stowed height be approximately 7' and approximately 28-32' extended height Must include controller box Must include handheld remote controller Must include top plate designed to accommodate 2 POE, PTZ, Heated cameras, and a Wi-Fi Access point (exact design parameters to be determined at post award meeting) Must include cables to run in coil or mast (Quantity 6 total cables consisting of 4 Cat 6 cables and 2 12V cables) Variations may be accepted by customer (an example may be one larger thicker 12v current wire that once at NEMA box at height is distributed into 2 feeds) Must include base plate mount for mast and mounting Must include hardware and associated parts to connect to the existing compressor system Must include plate and box for connection of handheld remote at customer desired location.