Demolition, new construction and renovation of an educational facility in Hillsborough, North Carolina. Completed plans call for the expansion of a primary / secondary education facility.

All Questions should be directed to Henry McKee of Orange County Schools. Project Overview Demolition of one (1) older greenhouse with the purchase and installation of one Greenhouse Structure, including heating, ventilation, temperature control, basket rails, shade cloth, and plumbing. Demolition Remove Existing 30' Blank x 40' Blank Greenhouse. Remove Block Wall supporting the greenhouse Remove 14' Blank x 24' Blank Wooden Pavilion over the Fire Pit area. The Fire Pit remains in place. Concrete Extend Concrete Pad to Meet the needs of the new Green house and extend all the way to the base of the Fire Pit. o Match Concrete needs with Engineered requirements for the Green house Required Greenhouse specifications 30 ft. Wide by 54 ft Long, with 8 ft. Sidewalls Galvanized steel frame consisting of: A) Column Post: B) Rectangle Tubing with welded base plates to be anchored to concrete C) Bows: 2" x 3" x 14 ga. Rectangle - 6' Spacing D) Trusses: 2" x 2" x 14 ga. Square, Spans 29' 3-1/4" Wide. E) Uprights: 1-3/8" Round F) Purlins 12 Runs 1-3/8" Round G) Ridge: Extruded Aluminum ridge cap allows easier installation & maintenance. H) Roof Glazing System: Extruded Aluminum roof channels spaced 6 ft. apart. I) Roof Glazing: 8mm clear twin wall no drip polycarbonate panels with a 10 yr. warranty. J) Eave Glazing System: Aluminum extruded eave channels allow for easier installation & maintenance. K) Eave Glazing: 8mm clear twin wall no drip polycarbonate with a 10 yr. warranty. L) Sealed Engineering Drawings for Structural Design M) Sealed Engineering Drawings for Foundation Design Wind and Snow Loads Wind Load (WL) 115 mph, 3 second gusts Snow Load (SL) 15 lbs. psf, Ground Snow Risk Category II N) The above Wind and Snow Loads may or may not meet your Local Building Code Requirements. End Gables Front End Gables: Framed for 2 - 24" exhaust fans and 1 - Main Entry door. A) Framing Studs: 2" x 2" x 14 ga. Square w/ brackets for wedge anchor attachment. B) Horizontal Purlins: 2" x 2" x 14 ga. Square C) Base Extrusion: Aluminum base extrusion attractively seals and "trims out" base of greenhouse. Rear End Gables Framed for 4 ft. x 20 ft. Evaporative Cooling System and 1 - Personnel Door. A) Framing Studs: 2" x 2" x 14 ga. Square w/ brackets for wedge anchor attachment. B) Horizontal Purlins: 2" x 2" x 14 ga. Square C) Base Extrusion: Aluminum base extrusion attractively seals and "trims out" base of greenhouse. D) End Gable glazing: 8mm clear twinwall no drip polycarbonate panels, complete framing, glazing, and extrusion package. (10 yr. warranty) Manufacturers.