Renovation of a road / highway in Crescent City, California. Completed plans call for the renovation of a road / highway.

The work includes the furnishing of the labor, materials, and equipment for mill and inlay asphaltic concrete repairs on Seventh Street, Eighth Street, C Street, D Street, and E Street per the drawings and specifications. The project is located at various locations in Crescent City, CA. Contractor must be licensed as an (A) General Engineering Contractor by the California Contractors State License Board to bid on this project. Bidders must correctly prepare and submit the documents listed in Section 00 40 00, Bid. Each bid must be accompanied by a bid guaranty bond, or a certified or cashier's check payable to the order of the Owner in an amount not less than ten percent (10%) of the amount of the bid as a guaranty that the bidder will execute the contract if it is awarded in conformity with the bid form. The successful bidder will be required to furnish performance and payment bonds, each in an amount not less than one hundred percent (100%) of the contract price. This project is subject to compliance monitoring and enforcement by the Department of Industrial Relations. Bidders on this work must comply with all applicable governmental and local agency requirements. Deadline to submit written questions September 11, 2025 1. Generally, the Work consists of furnishing all labor, materials, equipment and incidentals, and performing all work required to complete the project.mWhere Owner supplies equipment, Contractor is responsible for all other items to create a fully functional system. The work includes, but is not limited to: a. Milling removal of existing asphalt concrete per depth provided on the bid schedule. Asphalt removal areas to be painted out by City staff prior to removal. All areas to have a minimum of 3 inches removed except for "C Street", where the plans dictate removal of 5 inches of asphalt and/or subgrade. Milling removal to paid on a square foot basis. b. Asphalt replacement to occur on compacted subgrade prior to new asphalt placement. Existing asphalt edges to be tacked before placinghot asphalt. Temperatures and compaction of new asphalt shall comply with Caltrans specifications. Asphalt concrete to be paid for by the placed ton of asphalt as recorded by delivery scale tickets. c. Replace striping where removed by milling process, listed in plan drawings, or directed by City. All striping areas are within the asphalt replacement zones, adjoining them at either the end of the repair work or perpendicular side streets. No removal of existing prior to new striping placement is included within this bid item. Striping items paid either by the linear foot or each as described in the Bid Schedule. d. Provide Traffic Control as needed. Work must be completed within 100 calendar days from the Notice to Proceed.