Demolition, site work and new construction of a municipal facility in Pittsburgh, Pennsylvania. Completed plans call for the demolition of a municipal facility; for the construction of a municipal facility; and for site work for a municipal facility.

The Project includes the following Work :- The work generally includes demolition, removal and disposal of the existing secondary egress system and installation of new secondary egress on the Bellevue Borough Municipal Building. Project to include development of an engineer stamped design of the new secondary egress system. Project Location: 537 Bayne Avenue, Pittsburgh, PA 15202 R001778.0500 Question Deadline 10/02/2025 at 4:00 PM ET Location : online portal . All questions about the meaning or intent of the Bidding Documents are to be submitted via online Telephone inquiries are unacceptable. Bid security in the form of a Certified Check or Bid Bond shall be furnished with the bid in an amount not less than 10%. For all further requirements regarding bid submittal, qualifications, procedures, and contract award, refer to the Instructions to Bidders that are included in the Bidding Documents. Statutory Requirements Bidders must comply with all State antibid-rigging regulations pertaining to work associated with this project, and will be required to submit an executed non-collusion affidavit with the bid. Bidders should refer to provisions of federal and state statutes, rules and regulations dealing with the prevention of environmental pollution and preservation of public natural resources that affect the project, pursuant to Act No. 247 of the General Assembly of the Commonwealth of Pennsylvania, approved October 26, 1972. This Project falls under The Commonwealth of Pennsylvania enacted Act 141 of 2022, known as the Public Works Employment Verification Act ('the Act') which requires all public work contractors and subcontractors to utilize the Federal Government's E-Verify system to ensure that all employees performing work on public work projects are authorized to work in the United States. All Bidders are required to submit a Public Works Employment Verification Form as a precondition for the Contract Award. The estimated cost for this project is greater than Twenty-five Thousand Dollars ($25,000) and the Pennsylvania Prevailing Wage Act shall apply. All bids shall be irrevocable for 60 days after the bid opening date as provided by the Act of November 26, 1978 (P.L. 1309, No. 317), as amended by the Act of December 12, 1994 (P.L. 1042, No. 142). Bellevue Borough reserves the right to waive any defects, errors, omissions, mistakes, informalities, to accept any bid or combination of bids that are deemed to be in the best interest of Bellevue Borough, and to reject any or all proposals. ** doc info :Prospective Bidders are urged to register with the designated website as a plan holder, even if Bidding Documents are obtained from online or source other than the designated website in either electronic or paper format. The designated website will be updated periodically with addenda, lists of registered plan holders, reports, and other information relevant to submitting a Bid for the Project. All official notifications, addenda, and other Bidding Documents will be offered only through the designated website. Neither Owner nor Engineer will be responsible for Bidding Documents, including addenda, if any, obtained from sources other than the designated website. The Work of Project is defined by the Contract Documents and consists of the following: 1. Project generally includes, but is not limited to, demolition and proper disposal of an existing secondary egress as well as the design and installation of a new secondary egress on the Bellevue Borough Municipal Building. The design of the new secondary egress system to be completed by a Professional Engineer licensed in the State of Pennsylvania. The design engineer and/or Engineering firm is required to have Professional Liability Insurance. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.