Site work for a water / sewer project in Aubrey, Texas. Completed plans call for site work for a water / sewer project.

for providing all necessary labor, materials, machinery, equipment, tools, superintendence, and all incidentals and appurtenances required for the construction of the F.M. 428 18-Inch Parallel Force Main project that consist of, but is not limited to, approximately 8,133 linear feet of 18-inch force main by horizontal directional drilling, 233 linear feet of 18-inch force main by open cut, 170 linear feet of 18-inch force main by other than open cut in 27-inch steel encasement pipe, three 2-inch air vacuum valves with 6-foot diameter manholes, and all appurtenances, as shown in the plans. The successful bidder must furnish Performance Bond and Payment Bond in the amount of one hundred percent (100%) of the total contract price from a Surety Company holding a permit from the State of Texas to act as Surety. Should the total contract price be less than $25,000.00, no performance bond or payment bond will be required. Bidders are required to submit a cashier's or certified check issued by a bank satisfactory to the City of Aubrey, or a Bid Bond (with proper Power of Attorney) from a surety licensed to do business in the State of Texas, payable without recourse to the City of Aubrey, in an amount not less than five (5%) percent of the total amount of the proposal submitted to insure that the successful bidder will enter into a contract and execute all necessary bonds within ten (10) days after notice of award of the contract to him. This bid security must be included in the bid envelope for the bidder to be considered responsive. The successful bidder will be required to furnish Performance, Payment and Maintenance Bonds as described in the bidding documents. Cooper Reinbold, P.E. may be reached with general questions at creinbold@bhcllp.com (214-361-7900). Question Deadline 10/02/2025 Cooper Reinbold, P.E. may be reached with general questions at creinbold@bhcllp.com (214-361-7900) Completion- (180) consecutive calendar days Furnish & Install 18-Inch PVC Force Main Pipe by Open Cut with Class "B+" Embedment, Furnish & Install 18-Inch PVC Force Main Pipe by Horizontal Directional Drilling, Furnish & Install 18-Inch PVC Force Main Pipe by Other than Open Cut with 27-Inch Steel Encasement Pipe (3/8-Inch Thick), Connect to Existing 14-Inch Force Main, Furnish & Install 18-inch Plug with Pipeline Marker, Furnish & Install 2-Inch Air Release & Vacuum For Mobilization, Bonds, Insurance , Furnish & Install 18-Inch Resiliant Seated Gate, Remove & Replace Reinforced Concrete Sidewalk