Renovation of a mixed-use development in Brentwood, New York. Completed plans call for the renovation of a educational facility.

Bid date change from 10/22/2025 to 11/05/2025 as per Adda 3. Separate Bids are requested for the following Contracts: Mechanical As bid security, each Bid shall be accompanied by a certified check or Bid Bond made payable to the Owner, in accordance with the amounts and terms described in the Instructions to Bidders. The Owner requires Bids comply with bidding requirements indicated in the Instructions to Bidders. The Owner may, at its discretion, waive informalities in Bids, but is not obligated to do so, nor does it represent that it will do so. The Owner also reserves the right to reject any and all Bids. The Owner will not waive informalities which would give one Bidder substantial advantage or benefit not enjoyed by all affected Bidders. Bids may not be withdrawn before 60 days following the Bid opening thereof, unless an error is claimed by the Bidder in accordance with the Instructions to Bidders. ** Doc info : For the convenience of potential Bidders and other interested parties, the Bidding Documents may be examined at the following locations: Brentwood Union Free School District, 52 Third Avenue, Brentwood, New York 11717 Tetra Tech Architects & Engineers, 500 Bi-County Blvd, Suite 104,Farmingdale, New York 11735, Complete digital sets of Bidding Documents, drawings and specifications, may be obtained online ' for a non-refundable fee of $49.00 (Forty-Nine Dollars). Sonderling High School SED# 58-05-12-03-0-016-016 New Culinary Arts Building SED# 58-05-12-03-0-048-001 Ticket Booth SED# 58-05-12-03-7-049-001 The Work of the Project is defined by the Contract Documents and consists of the following: 1. Exterior site improvements, including new running track/synthetic turf sports field, Culinary Arts building, spectator plaza, ticket booth, and fire alarm replacement at Sonderling High School. A. Unless noted otherwise, Work in the Mechanical Contract includes, but is not limited to, that shown on the following Drawings: 1. Title Sheets/Symbols and Abbreviations (G) Drawings. 2. Code Compliance (G) Drawings. 3. Mechanical (M) Drawings. 4. Food Service Equipment (FS) Drawings, as required for the Work of this Contract. 5. Site Phasing Drawing SC112, attached at the end of this Section. 6. Temporary Construction Fence Plan Drawing SC102, attached at the end of this Section. B. Unless noted otherwise, Work in the Mechanical Contract includes, but is not limited to, the following: 1. Division 01 (General Requirements) Specification sections. 2. Division 02 (Existing Conditions) Specification sections. 3. Division 03 (Concrete) Specification sections, as follows: a. 03 30 00 Cast-in-Place Concrete, as required for the Work of this Contract. 4. Division 05 (Metals) Specification sections, as follows: a. 05 50 00 Metal Fabrications, as required for the Work of this Contract. 5. Division 07 (Thermal and Moisture Protection) Specification sections, as follows: a. 07 21 00 Thermal Insulation, as required for the Work of this Contract. b. 07 84 13 Penetration Firestopping, as required for the Work of this Contract. c. 07 92 00 Joint Sealants, as required for the Work of this Contract. 6. Division 08 (Openings) Specification sections, as follows: a. 08 31 13 Access Doors and Frames, as required for the Work of this Contract. 7. Division 09 (Finishes) Specification sections, as follows: a. 09 91 00 Painting, as required for the Work of this Contract. b. 09 96 00 High-Performance Coatings, as required for the Work of this Contract. 8. Division 11 (Equipment) Specification Section 11 40 00 as required for the Work of this Contract. 9. Division 23 (Heating, Ventilating and Air Conditioning) Specification sections. 10. Division 31 (Earthwork) Specification Sections as required for the Work of this Contract. Question Deadline 10/15/2025 Question emailed to TAE.Brentwood@TetraTech.com. Submit requests not less than 5 working days prior to the specified Bid Opening date and time