Site work for a water / sewer project in Hope Valley, California. Completed plans call for site work for a water / sewer project.

Installation of new electrical equipment, relocation of an existing generator to the project site, coordination with NV Energy to install a new electrical service, installation of electrical conduit, installation of a new submersible pump, and other appurtenant improvements. Question Deadline 12/01/2025 at 2:00 PM PT change from 12/04/2025 02:00 PM The last date for submitting questions to the Owner at the office of Douglas County Public Works, 1120 Airport Rd. #F-2, Minden, NV 89423 (Issuing Office), to be addressed The Contractor shall complete all Work as specified or indicated in the Contract Documents. The Project is generally described as follows: 1. Walleys Well Improvements Project which consists of installation of new electrical equipment, a new electrical service, relocating a generator, and installation of a new well pump. 2. The Site of the Work includes property, easements, and designated work areas described in greater detail in the Contract Documents but generally located at 2000 Foothill Rd., Genoa, Nevada. Install glass in windows, skylights, store fronts, and display cases, or on surfaces, such as building fronts, interior walls, ceilings, and tabletops. Read and interpret blueprints or specifications to determine size, shape, color, type, or thickness of glass, location of framing, installation procedures, or staging or scaffolding materials required. Determine plumb of walls or ceilings, using plumb lines and levels. Install pre-assembled metal or wood frameworks for windows or doors to be fitted with glass panels, using hand tools. Fabricate or install metal sashes or moldings for glass installation, using aluminum or steel framing. Operate cranes or hoists with suction cups to lift large, heavy pieces of glass. Set glass doors into frames and bolt metal hinges, handles, locks, or other hardware to attach doors to frames and walls. Cut, fit, install, repair, or replace glass or glass substitutes, such as plastic or aluminum, in building interiors or exteriors or in furniture or other products. Drive trucks to installation sites and unload mirrors, glass equipment, or tools. Load and arrange glass or mirrors onto delivery trucks, using suction cups or cranes to lift glass. Measure mirrors and dimensions of areas to be covered to determine work procedures. Cut and attach mounting strips, metal or wood moldings, rubber gaskets, or metal clips to surfaces in preparation for mirror installation. Pack spaces between moldings and glass with glazing compounds and trim excess material with glazing knives. Assemble, erect, or dismantle scaffolds, rigging, or hoisting equipment. Cut and remove broken glass prior to installing replacement glass. Secure mirrors in position, using mastic cement, putty, bolts, or screws. Measure and mark outlines or patterns on glass to indicate cutting lines. Grind or polish glass, smoothing edges when necessary. Fasten glass panes into wood sashes or frames with clips, points, or moldings, adding weather seals or putty around pane edges to seal joints. Score glass with cutters' wheels, breaking off excess glass by hand or with notched tools. Cut, assemble, fit, or attach metal-framed glass enclosures for showers, bathtubs, display cases, skylights, solariums, or other structures. Prepare glass for cutting by resting it on rack edges or against cutting tables and brushing thin layer of oil along cutting lines or dipping cutting tools in oil. Move furniture to clear work sites and cover floors or furnishings with drop cloths. Confer with customers to determine project requirements or to provide cost estimates. Select the type or color of glass or mirror according to specifications. Measure, cut, fit, and press anti-glare adhesive film to glass or spray glass with tinting solution to prevent light glare. Assemble and cement sections of stained glass together. Create patterns on glass by etching, sandblasting, or painting designs. Outside, overhead and underground construction and maintenance work on electrical transmission lines, switch yards, substations and distribution systems which shall include: Pole line work (whether built of wood, metal or other material): the digging and back-filling of holes for poles or anchors (by hand or mechanical equipment): the loading or unloading, handling, sorting and moving of materials; the assembly or erection of all materials including the guying, stringing of conductors and fiber optics or other work necessary on through to the ultimate completion of such pole work. Installing, servicing and repairing plastic, neon and illuminated signs; Ascending ladders or operating hydraulic or electric hoist to install, service, or examine sign to determine cause of malfunction; Wiring, rewiring or removing defective parts and installing new parts using electrician's tools; Removing sign or part of sign for repairs, such as structural fabrication, scroll repair, or transformer repair