Site work and paving for a transportation facility in Hallock, Minnesota. Completed plans call for site work for a transportation facility; and for paving for a transportation facility.

The project will include, but not be limited to the complete construction of the following items 1. Crack sealing and slurry seal of existing runway, apron and taxiway. 2. Remove and replace bituminous pavement at patch areas on runway. 3. Mill and overlay on bituminous pavement near hangar. Goals for minority participation for each trade: 6.9% Goals for female participation in each trade: 6.9% Question Deadline 01/01/2026 Contact information and submittal procedures for such questions are as follows Paul Jurek, P.E., Project Manager, by email at pjurek@bollig engineering.com or by telephone at 320-235-2555, Ext. 3041. Questions received less than seven days prior to the date for opening of Bids may not be answered. The Project includes the following work: 30,000 LF crack filling, 1,000 SY 2" bituminous mill and paving, remove and replace 150 SY bituminous pavement, 400,000 SF of bituminous slurry seal, 25,000 SF of pavement markings. A Pre-bid Conference will not be held for this project. Document note description: Non-Bidders, and Bidders who obtain more than one set of the Bidding Documents, will receive a refund of $60 for documents returned in good condition within the time limit indicated above. Make deposit checks for Bidding Documents payable to Bollig Engineering. The Issuing Office for the Bidding Documents is: Bollig Engineering, 1721 Technology Drive NE, Suite 100, Willmar, MN 56201. Prospective Bidders may obtain or examine the Bidding Documents at the Issuing Office on Monday through Friday between the hours of 8:00 a.m. and 5:00 p.m. Information and Bidding Documents for the Project can be purchased online for for $40.