Site work for a playground / park / athletic field in Fairbank, Iowa. Completed plans call for site work for a playground / park / athletic field.

The project consists of the removal of the existing cinder track, field events, bleachers, press box, football field and PCC, and replacing with a new 8-lane all-weather track, field events, bleachers, utilities, and turf football field. A single bid will be received for the work of the General Contractor, including the work of all subcontractors. Subcontractors of all construction trades shall submit bids to the General Contractors. Bidders must be properly licensed under the laws governing their respective trades and be able to obtain the insurance and bonds required for the work. Bid security shall be submitted with each bid in an amount not less than five percent (5%) of the bid amount. No bid may be withdrawn for a period of 60 calendar days following the date of the opening of bids. The Owner reserves the right to reject any and all bids, re-advertise for new bids, and waive informalities and irregularities in the bids submitted. The contract shall be awarded to the lowest responsible bidder whose bid is in conformance to the Bidding Documents. The successful bidder will be required to furnish a Performance Bond and a Payment Bond within ten (10) days after award in an amount equal to one hundred percent (100%) of the contract price. Contractors and approved subcontractors will be provided a Sales Tax Exemption Certificate to purchase building materials and/or supplies required in the performance of the construction contract. Before the work is commenced, a conference shall be held to discuss the contract, attended by the General Contractor, Subcontractors, Owner's Representatives, Architect, and Engineers. A. This contractor shall furnish all the labor and material necessary to install a complete electrical system for the building. +The system shall include all items of work as outlined in these specifications and on the drawings. B. All work shall be performed by a well-qualified, licensed electrician with a thorough knowledge of the various systems involved in this building. +It shall be this contractor's responsibility to see that their employees are familiar with all the various codes and tests applicable to this work. C. All equipment shall be new and of the type specified by the engineer unless otherwise noted in these specifications or on the drawings to remain and or be reused. D. The intent of the specifications and drawings is for complete installation of the systems outlined in the specifications and drawings so that at the conclusion of construction the system will be turned over to the owner complete and ready for safe and efficient operation. +The specifications and drawings cannot deal individually with the many minute items that may be eventually required by the nature of the systems. E. This contractor is required to furnish and install all such items normally included on systems of this type, which, while not mentioned directly herein or on the drawings are obviously essential to the installation and operation of the system and which are normally furnished on quality installation of this type. F. This contractor, before proceeding with any work, shall review the architectural drawings. +Any conflict between the electrical and architectural drawings shall be reported to the engineer for clarification. G. If there is a discrepancy between the drawings and the specifications or within either document, the more stringent requirement shall be estimated unless brought to the engineer's attention and an addendum is issued for clarification.