Site work, asbestos abatement and renovation of an educational facility in Buffalo, New York. Completed plans call for the renovation of a educational facility; for site work for a educational facility; and for asbestos abatement for a educational facility.

CR#: 2130211 DASNY is soliciting bids for the elevator upgrades project at Buffalo State University Bengal Hall 118, 1300 Elmwood Avenue, Buffalo, New York 14214. The scope of work includes, but is not limited to: Selective Demolition, Abatement, Interior finishes, finish carpentry, architectural woodwork, and built-in casework, Conveying systems, including elevator equipment, elevator cabs, and miscellaneous accessories, HVAC equipment, controls, testing, adjusting, & balancing, Building Management System work, Mechanical connections to equipment furnished by others, Electrical power & distribution, electrical connections to equipment furnished by others, Lighting, and Fire Alarm work. The estimated construction cost range is between $3,200,000.00 and $3,500,000.00. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. SDVOB Goal: 2.00% Minority / Women Business Enterprise contracting goals (MWBE) MBE Goal: 8.00% WBE Goal: 8.00% Question Deadline 01/26/2026 Every request for such interpretation must be received at least ten (10) days prior to the date fixed for the opening of the bid. A. General Construction Work includes, but is not limited to, the following: 1. Remaining work not identified as work under other contracts. 2. Site preparation, including clearing and earthwork. 3. Selective demolition. 4. Superstructure, including floor and roof construction and sprayed fire-resistive materials. 5. Interior construction, including partitions and fittings. 6. Fire-protection specialties. 7. Interior finishes, finish carpentry, architectural woodwork, and built-in casework. 8. Conveying systems, including elevators. 9. Furnishings, including casework, window treatments, and seating. B. Temporary facilities and controls in the General Construction Contract include, but are not limited to, the following: 1. Temporary facilities and controls that are not otherwise assigned to other contracts. 2. Project identification and temporary signs. 3. General waste disposal facilities. 4. Temporary fire-protection facilities. 5. Barricades, warning signs, and lights. 6. Security enclosure and lockup. 1.7 PLUMBING WORK A. Plumbing Work includes, but is not limited to, the following: 1. Plumbing fixtures. 2. Domestic water distribution. 3. Fire protection systems. 4. Plumbing connections to equipment furnished by all other contracts. 1.8 HVAC WORK A. HVAC Work includes, but is not limited to, the following: 1. HVAC systems and equipment. 2. HVAC instrumentation and controls. 3. HVAC testing, adjusting, and balancing. 4. Building automation system. 5. Mechanical connections to equipment furnished by all other contracts. 1.9 ELECTRICAL WORK A. Electrical Work includes, but is not limited to, the following: 1. Site communications and security. 2. Electrical service and distribution. 3. Communication and security. 4. Fire alarm and detection systems. 5. Electrical connections to equipment furnished by all other contracts. B. Electrical temporary facilities and controls include, but are not limited to, the following: 1. Electric power service and distribution. 2. Lighting, including site lighting. 3. Fire alarm and detection systems. 4. Electrical connections to existing systems and temporary facilities and controls furnished by other contracts.