Renovation of an educational facility in Pittsburgh, Pennsylvania. Completed plans call for the renovation of a educational facility.

Each bid shall be signed, sealed and accompanied by a bid bond of an approved Surety Company licensed to do business in the Commonwealth of PA in an amount of not less than ten percent (10%) of the amount of the base bid proposal. Bond shall be drawn in favor of the School District of Pittsburgh. The successful bidder will be required to furnish and pay for satisfactory 100% performance bond, 100% payment bond, and enter into a No-Lien Agreement with the School District of Pittsburgh. The School District of Pittsburgh reserves the right to waive any informalities in bids and to reject any or all bids. LOCATION PITTSBURGH SCIENCE & TECHNOLOGY ACADEMY 107 THACKERAY AVE, PITTSBURGH, PA 1521 PITTSBURGH SCIENCE & TECHNOLOGY ACADEMY 107 THACKERAY AVE, PITTSBURGH, PA 1521 Shall visit the premises and thoroughly familiarize himself with the existing conditions and the work to be performed prior to bid. The building will be accessible Mondays through Fridays, between the hours of 8:00 A.M. and 3:00 P.M The work to be performed under these Specifications and the accompanying drawings include the furnishing of all labor, materials, equipment, tools, supervision and services as required for the proper completion of all work which shall include but is not limited to the following: The Contractors shall include these specifications, accompanying drawings, of Work as part of his Contract Documents. B. Electrical contract shall consist of but not limited to the following: B. Electrical contract shall consist of but not limited to the following: 1. All Electrical Demolition. as may be required. Removal of obsolete EM generator, transfer switch, gas piping, supports, exhaust piping, water piping, etc. 2. Provision and installation of new wiring devices, as indicated. 3. Provision and installation of new branch circuits, conduits and wiring. 4. Provision and installation of new panelboards, feeders and sub feeders. as shown and as specified hereinafter. 5. Al required cutting, patching and painting for all electrical work in renovation areas. 6. Provide repaving of surfaces beyond scope and knit ot G. C.'s work as shown on the drawings 7. New Emergency Generator System. 8. Provision of Temporary Light and Power, as required. 9. Provide fire stop seats through fire-rated walls, ceilings and floors for all new raceway penetrations. 10. The Contractor shall coordinate any work related to items provided and installed by the Pittsburgh Public Schools to ensure a complete and functioning system. 11. Remove and reinstall acoustic tile ceiling panels. 1' x ceiling tiles or plaster ceilings, to perform electrical work. Reinstall ceiling panels to match existing construction. 12. All required testing of the new systems, 13. EM Generator testing. 14. All miscellaneous items. as hereinafter listed or as shown on Drawings. 15. Electrical Contractor shall remove the existing EM generator and exhaust system after the Asbestos Sub Contractor removes all asbestos contaminated items.