Site work for a water / sewer project in Bloomingdale, Georgia. Completed plans call for site work for a water / sewer project.

Questions Due Date: Feb 23rd 2026, 5:00 PM EST Chatham County is soliciting bids from qualified contractors to provide removal and installation of fencing and gate services at the Dillion Landfill facility in accordance with the terms and conditions contained within this bid. The landfill is located near 600 D.O.T Barn Road, Bloomingdale, GA, 31302. . Chatham County is soliciting bids from qualified contractors to provide removal and installation of fencing and gate services at the Dillion Landfill facility in accordance with the terms and conditions contained within this bid. The landfill is located near 600 D.O.T Barn Road Bloomingdale, GA, 31302 Work consists of the removal of approximately 150 feet of existing chain link fence with a double barn gate and the installation of 1,966' feet of new galvanized chain link fence with barbed wire and a 25 feet double access drive gate. Quantities provided are approximates/estimates. The contractor is responsible for visiting the site to verify site conditions and confirm quantities. Bid award will be based on the lowest unit price. Cost shall include all labor, materials, tools and equipment necessary to accomplish the task 1 Removal of existing chain link fence (150 ft) 2 Removal and disposal of existing double gate 3 Installation - 6 Ft, Galvanized chain link fence, 9 gauge; including barbed wire and arms, tension wire, posts, and hardware. 4 Insstallation - 6 Ft, Double access gate, 9-gauge galvanized chain link with locking to accommodate a heavy-duty lock (Master lock #5); including barbed wire and arms, tension wire, posts, and hardware. A. GATE REMOVAL AND FENCE/GATE INSTALLATION: 1. Removal of existing double barn gate and fence between the entrance and the front entrance. The disposal of the fence can be placed in the metal container on site. 2. Install approximately 1966' feet of new 9 gauge 6 feet high chain link fence. o 5/8" Top Rail o SP40 Line Posts Driven 4'deep o SP40Terminal Post 3" deep w/concrete o Tension wire at bottom 3. Install one (1) - 25 feet wide double access drive gate, 9 gauge 6 feet high, constructed with heavy gauge posts, hinges and drop rod for weight. o 4" Gate Post 3' deep w/ concrete o 1-5/8" SP40 gate framing o bull hinges o drop rod ASSY) 4. With locking to accommodate a heavy-duty lock (Master lock #5) The fence and gate shall be constructed with heavy gauge posts, middle rail throughout, bottom tension wire and 3 strand barbed wire arms installed along the front double gate entrance top to deter unauthorized entry. 5. All posts, line posts and top rails shall be schedule 40. The posts shall be on eight (8) feet centers and be set in eight (8) inch holes with concrete to a minimum depth of two (2) feet deep for a finished height of eight (8) feet posts. 6. Field markers will be placed onsite to show the approximate alignment, start and end of the proposed fence. 7. Bid price shall include all labor and ancillary fence parts (such as but not limited All work shall be completed within 120 calendar days Goals established for this project are 30% combined MBE/WBE unless otherwise specified.