Site work for a municipal facility in Vernal, Utah. Completed plans call for site work for a municipal facility.

The project involves obtaining bids from qualified vendors to provide portable wind fence units designed for heavy-duty litter control. The units must be capable of withstanding high-wind conditions and constructed to effectively contain and control wind-blown litter in demanding operational environments. Dimensions & Weight o Minimum overall dimensions: 24 ft length x 15 ft height x 8 ft width. o Maximum unit weight: 3,600 lbs. Mesh & Containment o Units shall be equipped with heavy-duty welded wire mesh, corrosion-resistant (galvanized and coated). o Mesh opening size shall be approximately 1.5 in square or equivalent, suitable for effective litter containment. o Rear mesh shall be reinforced to maintain structural integrity under wind loading, using coated aircraft cable or approved equivalent, securely connected to the frame. o Units shall include a litter control panel, side wing nets, and an overhead canopy designed to maximize litter containment and force debris downward within the unit. Structural Design o Units shall include diagonal cross-bracing or cabling as required to ensure rigidity and stability. o Frame members shall be structural steel of sufficient size and strength to meet wind-load requirements. o An additional steel wear plate shall be provided along the front base of the unit to resist impact and abrasion. Wind Resistance o Units shall be designed and engineered to withstand sustained wind speeds up to 65+ MPH while maintaining operational performance. o Units shall be designed to continue directing litter toward the base during high-wind conditions. Outriggers o Units shall be designed to allow the use of integrated outriggers for high-wind conditions. o Outriggers shall: o Be built into or securely attached to the frame o Extend to a minimum depth of 15 ft o Provide multiple depth/extension settings for stability adjustment Portability & Lifting o Units shall be fully portable. o Units shall be capable of being lifted from the front or rear. o Units shall be equipped with a factory-installed adjustable lift adapter compatible with: o Standard payloader buckets, or o Standard bulldozer blades. o Lifting hooks shall provide: o Vertical height adjustment ranging from approximately 6 ft 9 in to 12 ft 2 in o Horizontal adjustment in multiple incremental positions Finish o Units shall be delivered with a durable industrial exterior coating suitable for outdoor use (enamel paint or approved equivalent). Warranty o Units shall include a minimum five (5) year manufacturer's warranty covering defects in materials and workmanship. Questions & Inquiries CONTACT INFORMATION Trinna Gardner, Purchasing & Grants Uintah County 152 E 100 N Vernal, UT 84078 tgardner@uintah.utah.gov 435-781-5482