Renovation of a residential development in Allen, Oklahoma. Completed plans call for the renovation of a residential development.

Remove metal roof and replace with Dimensional Shingles in Allen Ok and Byng Ok Any prospective bidder desiring an explanation orinterpretation of the solicitation, specifications, drawings, etc., must request it at least 7 days before the scheduled time for bid opening. Requests may be oral or written Question Deadline 03/09/2026 Call Dee Sweet @ 580-421-8828 if you have any questions. 47-04 ALLEN LOW RENT and 47-04 BYNG LOW RENT ROOFING Work items: - Tear off all old metal roofing, bad decking and replace with Dimensional Shingles, Midnight Black in color for Allen and Dark Brown/Antiques Brown in color for Byng - Remove false dormer and replace any plywood if needed at Unit 7 Byng Low Rent - Tear off all layers of old shingles, replace any bad decking, replace with Heritage or better Dimensional Shingles - Install new felt, square D drip edge 1 K" x 3"with 1" projection from fascia edge, valley metal, roof jacks, ridge vents - Haul off all old material - Install all vent pipes back level and connected to device correctly - Furnish and install all metal edging, flashing, counter-flashing, metal louver vents and other sheet metal work - Install 26-gauge, 20" wide, galvanized metal valley flashing in all valleys - Cover decks with one layer of 30-pound asphalt saturated felt, laid with 3" horizontal joints - Lay shingles with true horizontal lines and staggered vertical joints, with not more than 5" exposure and not less than 2" headlap - Double shingles at eaves and gables - Form ridges and hips using pre-fabricated matching shingles, having equal exposure, not less than 5" on each side and laid with not less than 2" head-lap, doubled at hips for strength - Install roofing shingles with the starter row of shingles overlapping the felt underlayment strip by approximately %. Securely seal each top of strip shingles to the under-course of adhesive, factory applied to shingles - Install CERTAINTEED AIR VENT INC., "Ridge Filter Vent," in a continuous fashion, per manufacturer's details along entire length of ridge - Cover ridge vents with ridge cap shingles, furnish complete with closures at joints and ends as required - Incorporate eave vents into the vinyl soffit system as noted on plan wall sections