Renovation of a multi-residential development in Des Moines, Washington. Completed plans call for the renovation of a multi-residential development.

Work includes but is not limited to: 1. Good faith asbestos inspection(s) testing to comply with RCW 49.26.013 as required to achieve scope of work. 2. Removal and replacement of all existing roofing materials. 3. Inspect all exposed roof framing for any rot or damaged materials and repair as needed. 4. Block and seal any existing gable vents from attic interior. 5. Provide and install new 1/2 " CDX plywood deck sheathing and roofing materials according to manufacturer's recommended installation specifications. 6. Provide and install all new approved roofing system components: a. Install approved Ice and Water shield roof underlayment to all critical areas and valleys. b. Install approved synthetic roof underlayment. c. Install approved composition roofing system. and other tasks as noted in the bid documents. Bidders must have a current certificate of registration as a contractor for the last three years under the same name and have completed the required L&I training. A. Project Identification: Salish Place Roofing Replacement & Attic Repairs B. Project Location: 23641 20 th AVE S., Des Moines, WA 98198 1. Building F : Composition Roof Replacement & Attic Repairs C. Work includes but is not limited to: 1. Good faith asbestos inspection(s) testing to comply with RCW 49.26.013 as required to achieve scope of work. 2. Removal and replacement of all existing roofing materials and 100% of plywood deck sheathing as well as 530LF of fascia board. 3. Inspect all exposed roof framing for any rot or damaged materials and repair as needed. 4. Block and seal any existing gable vents from attic interior. 5. Provide and install new 1/2 " CDX plywood deck sheathing and roofing materials according to manufacturer's recommended installation specifications. 6. Provide and install all new approved roofing system components: a. Install approved Ice and Water shield roof underlayment to all critical areas and valleys. b. Install approved synthetic roof underlayment. c. Install approved composition roofing system. 7. Install Gibraltar Building Products PRV50BL Plastic Roof Vent or approved equal with minimum 50 sq.in Net Free Area ventilation. Total free area of ventilation must meet code requirements for attic ventilation. 8. Install Cor-A-Vent IN-Vent Attic Roof Vent or approved equal. 9. Install all metal 24-gauge flashing components according to manufacturer's recommendations including roof penetration flashing, roof to wall flashing, eave and rake flashings and W-Valley flashing. 10. Replace all pipe boots, flashing, and exhaust venting. 11. Relocate existing venting from exterior of building to vent out roof in order to reduce venting lengths. 12. Install permanent fall arrest/restraint roof anchors and all other accessory items to complete the installation and maintenance of the roof in a safe and secure manner. 13. Install new fascia boards Include painting of all fascia prior to installation of new gutters. (See Section 1.5 UNIT COSTS for details.) 14. Install new 5" K-style aluminum gutters and 2"x3" aluminum downspouts to match existing locations. 15. Haul away and dispose of all debris and demolished materials. 16. Include painting all b-vent flashings, roof accessories and lead pipe flashings as needed. 17. Daily cleaning and final cleaning of all trash and debris. 18. Prevailing wage rates to be included. 19. Roofing materials and installers must provide these applicable warranties: a. Contractor's workmanship warranty for a period of two (2) years from final completion. b. Subcontractor's labor and materials for a period of two (2) years from final completion. c. Manufacturer's warranty of 100% materials and labor for five (5) years without proration or reductions. d. Roofing manufacturer's 40-year warranty for materials.