Site work and paving for a road / highway in Kalispell, Montana. Completed plans call for site work for a road / highway.

The project involves Mill/Fill and Chip Seal in the Spread Creek Kalispell Area. Bidders are required to review additional solicitation details and requirements by logging into eMACS. Questions regarding specifications or requirements must be submitted through the eMACS Q&A Board. Bidders need to log into eMACS to submit questions. For general assistance, bidders can contact the eMACS Help Desk or refer to eMACS Resources for help with vendor registration or responding to events. Contractor will provide all labor, equipment, materials, incidentals and traffic control necessary to cold mill approximately 26,838' x 28' (MP 17.9 to MP 23) at a depth of .15 feet and produce, haul, place, tack and compact approximately 8,172 tons of 1/2" Commercial Plant Mix Grade S 58v-34 asphalt mix material. The overlay shall be paved. 15 feet thick and approximately 28 feet wide. Sinusoidal center-line rumble strips are to be included from MP 12.3 to MP 23 for a distance of 10.7 miles. Contractor shall provide all labor, equipment, materials, incidentals and traffic control necessary to produce, haul, place, roll and broom approximately 169,488 square yards of laid-in-place chip seal. The chip seal will be approximately 10.7 miles long and 27 feet wide from MP 12.3 to MP 23. Contractor shall provide CHFRS-2P asphalt emulsion and Type 1 chips. Traffic control with pilot cars must be maintained until dusk or fading light each work day as determined by the Project Manager Questions or information relating to either specifications or requirements of this solicitation must be asked through the portal.