Renovation of a municipal facility in Brighton, Tennessee. Completed plans call for the renovation of a municipal facility.

The Project consists of the construction/alterations/demolition of building/utilities/sitework as described in the drawings and project manual. Work to be completed within 90 days consecutive calendar days. Questions shall be in writing addressed to Felipe Valestegui, AIA NCARB - Felipev@a2h.com and Heather Murchison, Project Coordinator - Heatherm@a2h.com . A. Scope of demolition and removal work is indicated on drawings and specified in Section 02 4100. B. Hazardous Substances: Discovery of a suspected dangerous or hazardous substance during construction stops construction operations and may seriously delay a project. Contractors often encounter asbestos, lead, polychlorinated biphyenyls (PCBs), and similar hazardous materials on their construction projects. Because the use of those materials was common until recently, they are often found on renovation projects involving older buildings. AIA Document A201 outlines procedures contractors must follow when suspected dangerous or hazardous substances are uncovered during construction. If the suspect material proves to be a dangerous or hazardous substance, a contractor is not permitted to resume construction operations until the material has been rendered harmless or has been lawfully removed from the site. C. Scope of alterations work is indicated on drawings. D. Notice: In no event is a product to be used in this project known to contain any hazardous or toxic waste or material, radioactive materials, or other contaminants, the removal of which is required or the maintenance of which is prohibited, regulated or penalized by any local, state, or federal agency, authority or governmental unit. If any product is inadvertently specified which contains such materials, it is the contractor's, subcontractor's and supplier's obligation and duty to advise the Architect/Engineer of this fact prior to the ordering and/or installing of the product or material. E. Plumbing: Alter existing system and add new construction, keeping existing in operation. F. HVAC: Alter existing system and add new construction, keeping existing in operation. G. Electrical Power and Lighting: Alter existing system and add new construction, keeping existing in operation. H. Fire Suppression Sprinklers: Alter existing system and add new construction, keeping existing in operation.