Site work for a civil project in Otsego, Minnesota. Completed plans call for site work for a water / sewer project.

A mandatory Pre-Bid Conference will NOT be held for all prospective Bidders . Furnishing a pressure vessel system that will be incorporated into the Otsego Wellhouse No. 3 Water Treatment Plant (WTP) Project. The System includes the following components: 1. Two (2) double cell, dual-media steel pressure filters and associated piping, isolation valves with manual and electric actuators, air wash blower package, support gravel and filtration media, pressure gauges, sample ports, air relief valves, and pressure relief valves as shown on the Drawings and as included within the Specifications. 2. The System does not include: a. Water treatment plant building construction and regulatory or building permits. b. Piping or valves beyond the limits of Seller's scope of supply. c. System unloading, on-site storage, and field installation. d. Concrete pads and anchorage materials and equipment required for System installation. e. Site work and underground utilities required for the WTP Project. f. Mechanical construction related to the WTP Project. g. Electrical and Instrumentation and Controls construction related to the WTP Project. h. Any other items not specifically identified by the Contract Documents. 3. Seller shall be responsible for fabrication, off-site storage, and delivery of the System to the WTP Project Site and applicable fees, insurance, and other charges. Seller shall be responsible for coordinating delivery of the System to the WTP Project Site to align with the WTP Project construction schedule and ensure that appropriate equipment and arrangements are in place for receipt of the System. Each Bid shall be accompanied by a Bidder's Bond executed by the Bidder as principal and by a surety company authorized to do business in the State of Minnesota, payable to the City of Otsego, in a sum equal to five (5) percent of the full amount of the Bid. This is to serve as a guarantee that the Bidder will enter into a Contract as indicated in the Bidding Documents. Only Bids that are accompanied by such a Bond will be considered. Bidder must be licensed for the full amount of the Bid. Subject to the Bidding Documents and Owner discretion, no Bid will be read or considered which does not fully comply with the above provisions as to bond and license. The Owner reserves the right to reject any or all Bids, waive any informalities in the Bids received, and further reserves the right to award the Contract in the best interest of the Owner. The Owner reserves the right to hold the three (3) lowest Bids for a period not to exceed sixty (60) calendar days after the date of Bid opening. All official notifications, addenda, and other Bidding Documents will be offered only through the designated website. Neither Owner nor Engineer will be responsible for full or partial sets of Bidding Documents, including addenda, if any, obtained from sources other than the designated website or Issuing Office. The Issuing Office for the Bidding Documents is: Advanced Engineering and Environmental Services LLC 6901 E. Fish Lake Road, Suite 184, Maple Grove, MN 55369 Phone: 763-463-5036 Email: Ryan.Hanson@AE2S.com Question Deadline 05/01/2026 Questions received less than 10 days prior to the date for opening of Bids will not be answered.All questions about the meaning or intent of the Procurement Bidding Documents are to be submitted to Engineer in writing at: Ryan.Hanson@ae2s.com