Renovation of a theater / auditorium in Kenner, Louisiana. Completed plans call for the renovation of a theater / auditorium.

Question Deadline 05/08/2026 Bidders should email all questions to FinContracts@kenner.la.us no later than FIVE (5) working days prior to bid opening. Remove, furnish, and install exterior doors at Rivertown Theater. cope of Work: Contractor will remove, furnish and install exterior doors at Rivertown Theater. All work shall meet or exceed all local, state, federal, and manufacturer's codes and guidelines. 2. Effective Date: Upon the signature of the last party, this Agreement will be effective and will terminate upon completion. These specifications are prepared for a contract to remove, furnish and install eight (8) new exterior doors for the Rivertown Theater located at 325 Minor Street, Kenner LA 70062 for the City of Kenner, Department of General Services. The contract will entail providing all necessary labor, materials, equipment, tools and incidentals (as well as those cited in General Conditions) and made a part hereof. A total of 8 door slabs and 1 door frame is to be replaced. All equipment installed to be of new and current manufacture and is to be in proper working order as designed by manufacturer upon completion of job. TS-1 REMOVAL OF EXISTING EQUIPMENT: To properly remove & dispose of existing exterior doors and associated hardware. TS-2 EQUIPMENT: To furnish and install Ceco Doors (Model CEC-151-09/17) or equal exterior doors and hardware associated as listed below: TS-2.1 Double Hung Doors A & B: o Furnish and Install with the following specifications: o One (1) HMD LP 18 A60 2668 FG 1 3/4 Left Hand Reverse Swing (45R; C1; LP0; PV8; VCO) o One (1) HMD LP 18 A60 2668 FG 1 3/4 Right Hand Reverse Swing (45R; C1; LP0; PV8; VCO) o Two (2) Exit Devices 6170ED-36" 630 o One (1) Exit Device Trim AU626F Right Hand Reverse 630 (minus cylinder) o One (1) Exit Device Trim AU626F Left Hand Reverse 630 o Two (2) Rim Cylinders in 26D (Satin Chrome) R118-SC-26D-A2 o Two (2) Closers 3501 SN-134 689 o One (1) Threshold 171 A 72" o One (1) Weather-strip 303 AV (1 x 72", 2 x 84") o Two (2) Door Bottoms 345 AV 36" o Six (6) Hinges in 26D (Satin Chrome) MPB79 4 1/2 x 4 1/2 NRP FTMS FWS o Two (2) 18x60 Vision Lite Kits o Two (2) 17x59 Clear Tempered Glass o Two (2) HMD Cut-Out & Install - Large TS-2.2 Double Hung Doors C & D: o Furnish and Install with the following specifications: o One (1) HMD LP 18 A60 2668 FG 1 3/4 Left Hand Reverse Swing (45R; C1; LP0; PV8; VCO) o One (1) HMD LP 18 A60 2668 FG 1 3/4 Right Hand Reverse Swing (45R; C1; LP0; PV8; VCO) o Two (2) Exit Devices 6170ED-36" 630 o One (1) Exit Device Trim AU626F Right Hand Reverse 630 (minus cylinder) o One (1) Exit Device Trim AU626F Left Hand Reverse 630 o Two (2) Rim Cylinders in 26D (Satin Chrome) R118-SC-26D-A2 o Two (2) Closers 3501 SN-134 689 o One (1) Threshold 171 A 72" o One (1) Weather-strip 303 AV (1 x 72", 2 x 84") o Two (2) Door Bottoms 345 AV 36" o Six (6) Hinges in 26D (Satin Chrome) MPB79 4 1/2 x 4 1/2 NRP FTMS FWS o Two (2) 18x60 Vision Lite Kits o Two (2) 17x59 Clear Tempered Glass o Two (2) HMD Cut-Out & Install - Large TS-2.3 Door E: o Remove Existing Door Frame and Furnish and Install a New Door Frame. o Perform any necessary CMU repairs. o Furnish and Install with the following specifications: o One (1) HMD LP 18 A60 3068 F 1 3/4 Right Hand Reverse Swing (45R; C1; PR3) o One (1) Exit Device 6100 36" 630 o One (1) Exit Device Trims AU626F Right Hand Reverse Swing 630 (minus cylinder) o One (1) Rim Cylinders in 26D (Satin Chrome) R118-SC-26D-A2 o One (1) Closer 3501 SN-134 689 o One (1) Threshold 271 A 36" o One (1) Weather-strip 303 AV (1 x 36", 2 x 84") o One (1) Door Bottom 345 AV 36" o Three (3) Hinges in 26D (Satin Chrome) MPB79 4 1/2 x 4 1/2 NRP FTMS FWS o One (1) Astragal 357 SP 84" o Three (3) Mutes 608-RW TS-2.4 Door# F: o Furnish and Install with the following specifications: o One (1) HMD LP 18 A60 3068 F 1 3/4 Left Hand Reverse Swing (45R; C1; PR3) o One (1) Exit Device 6100 36" 630 o One (1) Exit Device Trim AU626F Right Hand Reverse 630 (minus cylinder) o One (1) Rim Cylinder in 26D (Satin Chrome) R118-SC-26D-A2 o One (1) Closer 3501 SN-134 689 o One (1) Threshold 271 A 36" o One (1) Weather-strip 303 AV (1 x 36", 2 x 84") o One (1) Door Bottom 345 AV 36" o Three (3) Hinges in 26D (Satin Chrome) MPB79 4 1/2 x 4 1/2 NRP FTMS FWS o One (1) Astragal 357 SP 84" o Three (3) Mutes 608-RW TS-2.5 Doors G & H: o Furnish and Install with the following specifications: o Two (2) HMD LP 18 A60 3068 F 1 3/4 Right Hand Reverse Swing (45R; C1; PR3) o Two (2) Exit Devices 6100 36" 630 o Two (2) Exit Device Trims AU626F Right Hand Reverse Swing 630 (minus cylinder) o Two (2) Rim Cylinders in 26D (Satin Chrome) R118-SC-26D-A2 o Two (2) Closers 3501 SN-134 689 o Two (2) Thresholds 271 A 36" o Two (2) Weather-strips 303 AV (1 x 36", 2 x 84") o Two (2) Door Bottoms 345 AV 36" o Six (6) Hinges in 26D (Satin Chrome) MPB79 4 1/2 x 4 1/2 NRP FTMS FWS o Two (2) Astragals 357 SP 84" o Six (6) Mutes 608-RW TS-3 MISCELLANEOUS: Cylinders will be rekeyed by the General Services Department